- 6 -
2
Screw the A type installation plate down by putting the M4 flathead screws (supplied with AG-150A) through the mounting
holes on the Electric Box.
Mounting holes
NOTE
If a precise hole is cut out in as shown in Step 3 above, the screw holes on the A type
installation plate will automatically be aligned with the screw holes on the Electric Box.
M4 flathead screws
(supplied with AG-150A)
Mounting holes for the
A type installation plate
Wall
NOTE
Drilling prepared holes (ø3) on the walls will make it easier to screw in the screws.
(* Drill appropriate prepared holes according to the wall material.)
