3
Table 2-3 Hardware requirement of table setting tool
Item Details
Remarks
Computer unit
Pentium® II 500MHz or faster
OS
Windows® 2000Pro/XP English version
Memory
128Mbyte or more,
(For WindowsXP, recommend 256MByte or more)
Screen resolution
1024×768 or more
Hard disk
At least 100 Mbytes of available space
Slot
PC card slot
*Use with ATA card
adapter
Drive
CD-ROM drive (Requires at installing)
Others
Pointing device, such as a mouse
* Pentium is the trademark or registered trademark of Intel Corporation in the United States of America and other countries,
or its subsidiary.
2-4 Image of Using Tool
By using this table setting tool, the number of G-50A to be controlled, the output signal format, the relationship
between the input and the output, may be set. Save the set content into ATA card, and insert the ATA card to
the sequencer for use.
Use the adapter
Table setting tool
(ATA card with the setting content written)
*For the installation method of PAC-YG21CDA, refer to
the installation (setup) manual.
PLC
ATA card
(Q2MEM-8MBA)
--- ATA card for which the software of
PAC-YG21CDA is being written
Notice
z
The set content may be saved by the HDD of your PC in addition to the ATA card. Backing
up the set content is strongly recommended.
The following 3 files
will be created:
SET.CSV
PARA.CSV
TABLE.BIN
