© 2018 Mitsubishi Electric US, Inc.
5
Mitsubishi Electric’s Wireless Interface 2 is designed for communication to
Mitsubishi Electric’s kumo cloud
®
. Third party Wireless Interface 2 devices cannot
connect to Mitsubishi Electric’s kumo cloud
®
. Mitsubishi Electric is not responsible
for any
(i) underperformance of a system or any product;
(ii) system or product fault; or
(iii) loss or damage to any system or product; which is caused by or arises from
connection to and/or use of any third party Wireless Interface 2 or any third party
wireless or Wi-Fi service with Mitsubishi Electric equipment.
to
2. What’s in the Box
3. Parts
● Turn off and verify the power has been disconnected to the complete
air-conditioning system
● Dismantle the indoor unit in accordance with the service manual and locate
CN105 on the main control PCB
● Connect the cable on the PAC-USWHS002-WF-2 to the CN105 connector on the
indoor unit
● PAC-USWHS002-WF-2 may be attached on or in close vicinity to the indoor unit.
Attach one strip to the PAC-USWHS002-WF-2 and the other to the installation site.
Align the strips and press to securely attach the PAC-USWHS002-WF-2 to the
installation site.
● Start up: Refer to the PAC-USWHS002-WF-2 Install guide located at
https://meus.mylinkdrive.com/item/PAC-USWHS002-WF-2.html
Wireless Interface 2
PAC-USWHS002-WF-2
4. Connecting the Wireless Interface 2
● Wireless Interface 2 with 2 removable plugs for optional connections
● Connecting Cable
● Velcro strips (2)
● Product insert
The PAC-USWHS002-WF-2 adds a second 5-pin interface (identified with a
red connector) for use with compatible control accessories. Please refer to the
Wireless Interface 2 compatibility guide to identify what control accessories may
be connected to this second 5-pin connector including what Mitsubishi Electric
equipment is compatible. The Mitsubishi Electric equipment is connected via a
cable plugged into the white connector.
Note: Installation should be conducted by a professional installer.
