Mitsubishi Electric NM-VS100, Installation And Operation Manual

Page: 18 / 40

- 12 -
z
Sequence Setting
Automatic screen switching setting can be seen with the control screen and BNC Out,
and either watching one of the two or the two at a time is possible. You can select,
among the 4 channels and Quad screen, the screen that will be included in switching list,
for each of which you can set delay time separately.
„ Sequence Mode Setting
Enable
Allow checking at time of an automatic screen switching function in operation.
Use sequence mode in Live View
Make it possible to see the automatic screen switching on the control screen.
Use sequence mode in BNC
Allow the automatic screen switching to be seen on BNS Out screen.
Use sequence mode in Live View and BNC Out
Allow the automatic screen switching to be seen on the control screen and BNS
Out screen.
Channel1~4, Quad Stream
Each of the 4 channels and Quad screen can be selected to be included on the
switching list to set up the delay time.