40
HEAD OFFICE: TOKYO BUILDING, 2-7-3, MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN
Fixing the indoor coil thermistor
*
There are 2 forms of parts for fixing the indoor coil thermistor.
NOTE:
Take care to avoid loss and accidental falling of the clip-shape part inside the unit.
Mount the clip-shape part on the marked position.
Do not pull the lead wire when removing the indoor coil thermistor.
Holder shape
Clip shape
When fixing the indoor coil thermistor
to the clip-shape/holder-shape part, the
lead wire should point down.
1. Set the indoor coil
thermistor in the center of
the clip-shape part.
2. Check the (marked)
mounting position.
3. Mount the
clip-shape part.
Position and procedure for mounting the clip-shape part
About the
same length
©
Copyright 2018 MITSUBISHI ELECTRIC CORPORATION
Issued: Feb. 2022. No. OBH818 REVISED EDITION-C
Issued: Nov. 2021. No. OBH818 REVISED EDITION-B
Issued: Jan. 2019. No. OBH818 REVISED EDITION-A
Published: Sep. 2018. No. OBH818
Made in Japan
Specifications are subject to change without notice.
