12
Perform the following operations while the unit is operating.
■
Press
LONG
button.
The fan speed increase.
When the fan speed is set to AUTO, the fan
speed is higher than a fan speed determined
by the room temperature and the set tempera-
ture.
In addition, the HORIZONTAL VANE moves to
the position for LONG mode.
Mechanism of the LONG operation
In the following example, the VERTICAL VANE
is sent to
(front).
To Release the LONG mode.
COOLING/DRY
Fan speed: Higher
Solid arrow: When the LONG mode is used
Dotted arrow: When the LONG mode is not used
Long operation
HOW TO USE LONG OPERATION
HEATING
■
Press the
LONG
button again.
Note
■
LONG mode is also released in the following ways.
• By pressing the
button
• By pressing the
button (only during COOL mode)
■
Even when the LONG mode is being used, the air may
not reach a long distance due to the installation location
of the air conditioner.
In this case, press the
button to set the fan speed
to
(Hi), and then press the
LONG
button.
■
,
and
buttons, temperature buttons and
the ON/OFF timer are available.
Econo cool operation
■
Press
button.
Enable this mode to enjoy healthy, comfortable and power-saving cooling operation.
Please operate as follows in manual cooling mode
Select the air conditioner operating in (Econo Cool) control mode, which controls the horizontal vane to swing periodically
and automatically according to the outlet temperature.
Moreover, the set temperature increases by 2
℃
automatically based on cooling operation.
When quitting Econo Cool operation
■
Press
button again.
·
In Econo Cool operation, press
button or change operation mode to quit Econo Cool button.
·
Airflow speed button
, Extreme Hot or Extreme Cold button and Timing ON/OFF button can be used
continuously.
What is Econo Cool?
Swinging airflow (variable flow) feels cooler than constant airflow, therefore, even if the set temperature is set to a
higher one by 2
℃
you can feel comfortable and power is saved.
Summary of Contents for MSZ-WG18VA-H1
Page 26: ......
