Mitsubishi Electric MSZ-EF22VAB Operating Instructions Manual Download Page 8

En-7

● OPERATING INSTRUCTIONS ●

W

EEKLY TIMER OPERATION

•  A maximum of 4 ON or OFF timers can be set for individual days of the week.

•  A maximum of 28 ON or OFF timers can be set for a week.

Setting the weekly timer

*  Make sure that the current time and day are set correctly.

1

Press 

 to enter the weekly timer setting mode.

2

Press 

 

 

and

 

 

to select setting day and number

.

3

Press

 

 , 

 , and 

 to set ON/OFF, time, and temperature.

Press 

 and 

 to continue setting the timer for 

other days and/or numbers.

4

Press 

 to complete and transmit the weekly timer setting.

Note:

•  Press 

 to transmit the setting information of weekly timer to the indoor 

unit. Point the remote controller toward the indoor unit for 3 seconds.

•  When setting the timer for more than one day of the week or one number,  

 does not have to be pressed per each setting. Press 

 once af-

ter all the settings are complete. All the weekly timer settings will be saved.

•  Press 

 to enter the weekly timer setting mode, and press and hold 

  for  5  seconds  to  erase  all  weekly  timer  settings.  Point  the  remote 

controller toward the indoor unit.

5

Press 

 to turn the weekly timer ON. (

 

 

lights.)

*  When the weekly timer is ON, the day of the week whose timer setting 

is complete, will light.

Press 

 again to turn the weekly timer OFF. ( 

 

goes out.)

Note:

The saved settings will not be cleared when the weekly timer is turned OFF.

Checking weekly timer setting

1

Press 

 to enter the weekly timer setting mode.

 blinks.

2

Press 

 or 

 to view the setting of the particular

day or number.

Press 

 to exit the weekly timer setting.

Note:

When all days of the week are selected to view the settings and a different

 

set-

ting is included among them,  

  will be displayed.

 which was blink-

ing goes out, and the 

current time will be 

displayed.

 blinks.

Note:

The simple ON/OFF timer setting is available while the weekly timer is on. In 

this case, the ON/OFF timer has priority over the weekly timer; the weekly timer 

operation will start again after the simple ON/OFF timer is complete.

E.g. :  Runs at 24°C from waking up to leaving home, and runs at 27°C from 

getting home to going to bed on weekdays.

 

Runs at 27°C from waking up late to going bed early on weekends.

Setting1 

Setting2 

Setting3 

Setting4

Setting1 

Setting2

6:00 

8:30 

17:30 

22:00

 

8:00 

21:00

24°C

27°C

ON 

OFF 

ON 

OFF

ON 

OFF

Mon 

 

Fri

~

Sat 

 

Sun

~

27°C

Pressing 

 selects the day of 

the week to be set.

Pressing 

 selects 

the setting number.

*  All days can be selected.

E.g. :  [Mon Tue ... Sun] 

and [1]

 

are selected.

E.g. :  [ON], [6:00]  

and [24°C] are 

selected.

Pressing 

 

selects ON/OFF timer.

Pressing 

 

deletes timer setting.

Pressing 

adjusts the time.

Pressing 

adjusts the tem-

perature.

*  Hold down the button to change the time quickly.

SG79F596H01_en.indd   7

2011/03/15   7:56:25

Summary of Contents for MSZ-EF22VAB













Reviews: