Mitsubishi Electric MSZ-EF09NAB Operating Instructions Manual Download Page 2

En-1

● OPERATING INSTRUCTIONS ●

S

AFETY PRECAUTIONS

C

ONTENTS

 SAFETY PRECAUTIONS 

1

 NAME OF EACH PART 

3

 PREPARATION BEFORE OPERATION 

4

 SELECTING OPERATION MODES 

5

 FAN SPEED AND AIRFLOW DIRECTION ADJUSTMENT 

6

 SMART SET OPERATION  

7

 ECONO COOL OPERATION  

7

 TIMER OPERATION (ON/OFF TIMER) 

7

 WEEKLY TIMER OPERATION 

8

 CLEANING 

9

 WHEN YOU THINK THAT TROUBLE HAS OCCURRED 

10

 WHEN THE AIR CONDITIONER IS NOT GOING TO BE USED FOR A LONG TIME 

11

 INSTALLATION PLACE AND ELECTRICAL WORK 

11

 SPECIFICATIONS 

11

 WARNING

Do not connect the power cord to an intermediate point, use 

an extension cord, or connect multiple devices to a single 

AC outlet.

•  This may cause overheating, fi re, or electric shock.

Make sure the power plug is free of dirt and insert it securely 

into the outlet.

•  A dirty plug may cause fi re or electric shock.

Do not bundle, pull, damage, or modify the power cord, and do 

not apply heat or place heavy objects on it.

•  This may cause fi re or electric shock.

Do not turn the breaker OFF/ON or disconnect/connect the 

power plug during operation.

•  This may create sparks, which can cause fi re.

•  After the indoor unit is switched OFF with the remote controller, 

make sure to turn the breaker OFF or disconnect the power plug. 

Do not expose your body directly to cool air for a prolonged 

length of time.

•  This could be detrimental to your health.

The unit should not be installed, relocated, disassembled, 

altered, or repaired by the user.

•  An improperly handled air conditioner may cause fi re, electric 

shock, injury, or water leakage, etc. Consult your dealer.

•  If the power supply cord is damaged, it must be replaced by the 

manufacturer or its service agent in order to avoid a hazard.

When installing, relocating, or servicing the unit, make sure 

that no substance other than the specifi ed refrigerant (R410A) 

enters the refrigerant circuit.

•  Any presence of foreign substance such as air can cause abnor-

mal pressure rise and may result in explosion or injury.

•  The use of any refrigerant other than that specifi ed for the system 

will cause mechanical failure, system malfunction, or unit break-

down. In the worst case, this could lead to a serious impediment 

to securing product safety.

•  Since rotating parts and parts which could cause an electric shock are used 

in this product, be sure to read these “Safety Precautions” before use.

•  Since the cautionary items shown here are important for safety, be sure to 

observe them.

•  After reading this manual, keep it together with the installation manual in a 

handy place for easy reference.

•  Be sure to receive a guarantee card from your dealer and check that the 

purchased date and shop name, etc. are entered correctly.

Marks and their meanings

 WARNING :

Incorrect  handling  could  cause  serious  hazard,  such  as 

death, serious injury, etc. with a high probability.

 CAUTION :

Incorrect handling could cause serious hazard depending 

on the conditions.

This appliance is not intended for use by persons (including 

children) with reduced physical, sensory or mental capabilities, 

or lack of experience and knowledge, unless they have been 

given supervision or instruction concerning use of the appli-

ance by a person responsible for their safety.
Children should be supervised to ensure that they do not play 

with the appliance.

  

Do not insert your fi nger, a stick, or other objects into the air 

inlet or outlet.

•  This may cause injury, since the fan inside rotates at high speeds 

during operation.

  

In case of an abnormal condition (such as a burning smell), 

stop the air conditioner and disconnect the power plug or turn 

the breaker OFF.

•  A continued operation in the abnormal state may cause a mal-

function, fi re, or electric shock. In this case, consult your dealer.

When the air conditioner does not cool or heat, there is a pos-

sibility of refrigerant leakage. In this case, consult your dealer. 

If a repair involves recharging the unit with refrigerant, ask the 

service technician for details.

•  The refrigerant used in the air conditioner is safe. Normally, it does 

not leak. However, if refrigerant leaks and comes in contact with 

a heat source such as a fan heater, kerosene heater, or cooking 

stove, it will create a harmful gas.

The user should never attempt to wash the inside of the indoor 

unit. Should the inside of the unit require cleaning, contact 

your dealer.

•  Unsuitable detergent may cause damage to plastic material inside 

the unit, which may result in water leakage. Should detergent 

come in contact with electrical parts or the motor, it will result in 

a malfunction, smoke, or fi re.

 CAUTION

Do not touch the air inlet or the aluminum fi ns of the indoor/

outdoor unit.

•  This may cause injury.

Do not use insecticides or fl ammable sprays on the unit.

•  This may cause a fi re or deformation of the unit.

Meanings of symbols used in this manual

 :  Be sure not to do.

 :  Be sure to follow the instruction.

 :  Never insert your fi nger or stick, etc.

 : 

Never step onto the indoor/outdoor unit and do not put anything on them.

 :  Danger of electric shock. Be careful.

 :  Be sure to disconnect the power supply plug from the power outlet.

 :  Be sure to shut off the power.

JG79Y038H02_en.indd   1

2016/06/15   16:52:14

Summary of Contents for MSZ-EF09NAB





































Reviews: