background image

En-1

● OPERATING INSTRUCTIONS ●

 WARNING

Do not connect the power cord to an intermediate point, use an 
extension cord, or connect multiple devices to a single AC outlet.

•  This may cause overheating, fi re, or electric shock.

Make sure the power plug is free of dirt and insert it securely into 
the outlet.

•  A dirty plug may cause fi re or electric shock.

Do not bundle, pull, damage, or modify the power cord, and do not 
apply heat or place heavy objects on it.

•  This may cause fi re or electric shock.

Do not turn the breaker OFF/ON or disconnect/connect the power 
plug during operation.

•  This may create sparks, which can cause fi re.
•  After the indoor unit is switched OFF with the remote controller, make 

sure to turn the breaker OFF or disconnect the power plug. 

•  Since rotating parts and parts which could cause an electric shock are used 

in this product, be sure to read these “Safety Precautions” before use.

•  Since the cautionary items shown here are important for safety, be sure to 

observe them.

•  After reading this manual, keep it together with the installation manual in a 

handy place for easy reference.

•  Be sure to receive a guarantee card from your dealer and check that the 

purchased date and shop name, etc. are entered correctly.

Marks and their meanings

 WARNING :

Incorrect  handling  could  cause  serious  hazard,  such  as 

death, serious injury, etc. with a high probability.

 CAUTION :

Incorrect handling could cause serious hazard depending 

on the conditions.

Do not expose your body directly to cool air for a prolonged length 
of time.

•  This could be detrimental to your health.

The unit should not be installed, relocated, disassembled, altered, 
or repaired by the user.

•  An improperly handled air conditioner may cause fi re, electric shock, 

injury, or water leakage, etc. Consult your dealer.

•  If the power supply cord is damaged, it must be replaced by the manu-

facturer or its service agent in order to avoid a hazard.

When installing, relocating, or servicing the unit, make sure that 

no substance other than the specifi ed refrigerant (R32) enters the 

refrigerant circuit.

•  Any presence of foreign substance such as air can cause abnormal 

pressure rise and may result in explosion or injury.

•  The use of any refrigerant other than that specifi ed for the system will 

cause mechanical failure, system malfunction, or unit breakdown. In the 
worst case, this could lead to a serious impediment to securing product 
safety.

Meanings of symbols used in this manual

 :  Be sure not to do.

 :  Be sure to follow the instruction.

 :  Never insert your fi nger or stick, etc.
 :  Never step onto the indoor/outdoor unit and do not put anything on 

them.

 :  Danger of electric shock. Be careful.

 :  Be sure to disconnect the power supply plug from the power outlet.

 :  Be sure to shut off the power.

 :  Risk of fi re.

 :  Never touch with wet hand.

 :  Never splash water on the unit.

S

AFETY PRECAUTIONS

C

ONTENTS

Meanings of symbols displayed on indoor unit and/or outdoor unit

WARNING

(Risk of fi re)

This unit uses a fl ammable refrigerant.

If refrigerant leaks and comes in contact with fi re or heating part, it will create harmful gas and there is risk of fi re.

Read the OPERATING INSTRUCTIONS carefully before operation.

Service personnel are required to carefully read the OPERATING INSTRUCTIONS and INSTALLATION MANUAL before operation.

Further information is available in the OPERATING INSTRUCTIONS, INSTALLATION MANUAL, and the like.

 

SAFETY PRECAUTIONS 

1

 

NAME OF EACH PART 

4

 

PREPARATION BEFORE OPERATION 

5

 

SELECTING OPERATION MODES 

6

 

FAN SPEED AND AIRFLOW DIRECTION ADJUSTMENT 

7

 

I-SAVE OPERATION  

8

 

ECONO COOL OPERATION  

8

 

NIGHT MODE OPERATION  

9

 

TIMER OPERATION (ON/OFF TIMER) 

9

 

WEEKLY TIMER OPERATION 

10

 

DEMAND RESPONSE AND INDOOR UNIT OPERATION (MUZ-VGD TYPE ONLY) 

11

 

EMERGENCY OPERATION 

11

 

AUTO RESTART FUNCTION 

11

 

CLEANING 

12

 

Wi-Fi INTERFACE SETTING UP (VGK 

TYPE ONLY

)

 

13

 

WHEN YOU THINK THAT TROUBLE HAS OCCURRED 

16

 

WHEN THE AIR CONDITIONER IS NOT GOING TO BE USED FOR A LONG TIME 

17

 

INSTALLATION PLACE AND ELECTRICAL WORK 

17

 

SPECIFICATIONS 

18

JG79Y333H01_6th.indd   1

2018/06/19   10:28:02

Summary of Contents for MSZ-AP22VGD





















Reviews: