background image

En-10

W

EEKLY TIMER OPERATION

•  A maximum of 4 ON or OFF timers can be set for individual days of the week.

•  A maximum of 28 ON or OFF timers can be set for a week.

Setting the weekly timer

*  Make sure that the current time and day are set correctly.

1

Press 

 to enter the weekly timer setting mode.

2

Press 

 

 

and

 

 

to select setting day and number

.

3

Press 

 , 

 , and 

 to set ON/OFF, time, and 

temperature.

Press 

 and 

 to continue setting the timer for 

other days and/or numbers.

4

Press 

 to complete and transmit the weekly timer 

setting.

Note:

•  Press 

 to transmit the setting information of weekly timer to the indoor 

unit. Point the remote controller toward the indoor unit for 3 seconds.

•  When setting the timer for more than one day of the week or one number,  

 does not have to be pressed per each setting. Press 

 once 

after all the settings are complete. All the weekly timer settings will be saved.

•  Press 

 to enter the weekly timer setting mode, and press and hold 

  for  5  seconds  to  erase  all  weekly  timer  settings.  Point  the  remote 

controller toward the indoor unit.

5

Press 

 to turn the weekly timer ON. (

 

 

lights.)

*  When the weekly timer is ON, the day of the week whose timer setting 

is complete, will light.

P

ress 

 again to turn the weekly timer OFF. ( 

 

goes out.)

Note:

The saved settings will not be cleared when the weekly timer is turned OFF.

Checking weekly timer setting

1

Press 

 to enter the weekly timer setting mode.

 blinks.

2

Press 

 or 

 to view the setting of the particular 

day or number.

Press 

 to exit the weekly timer setting.

Note:

When all days of the week are selected to view the settings and a different

 

set-

ting is included among them,  

  will be displayed.

 which was blink-

ing goes out, and the 

current time will be 

displayed.

 blinks.

Note:

The simple ON/OFF timer setting is available while the weekly timer is on. In 

this case, the ON/OFF timer has priority over the weekly timer; the weekly timer 

operation will start again after the simple ON/OFF timer is complete.

E.g. :  Runs at 24°C from waking up to leaving home, and runs at 27°C 

from getting home to going to bed on weekdays.

 

Runs at 27°C from waking up late to going bed early on weekends.

Setting1 

Setting2 

Setting3 

Setting4

Setting1 

Setting2

6:00 

8:30 

17:30 

22:00

 

8:00 

21:00

24°C

27°C

ON 

OFF 

ON 

OFF

ON 

OFF

Mon 

 

Fri

~

Sat 

 

Sun

~

27°C

Pressing 

 selects the day of 

the week to be set.

Pressing 

 selects 

the setting number.

*  All days can be selected.

E.g. :  [Mon Tue ... Sun] 

and [1] are selected.

E.g. :  [ON], [6:00] 

and [24°C] are 

selected.

Pressing 

 selects 

ON/OFF timer.

Pressing 

 deletes 

timer setting.

Pressing 

 

adjusts the time.

Pressing 

 

adjusts the tem-

perature.

*  Hold down the button to change the time quickly.

JG79Y333H01_6th.indd   10

2018/06/19   10:28:13

Summary of Contents for MSZ-AP22VGD





















Reviews: