En-3
● OPERATING INSTRUCTIONS ●
• Make sure the polarity of the batteries is correct.
• Do not use manganese batteries. The remote controller could malfunction.
• Do not use rechargeable batteries.
• Replace all batteries with new ones of the same type.
• Batteries can be used for approximately 1 year. However, batteries with
expired shelf lives last shorter.
Before operation:
Insert the power supply plug into the power outlet and/or turn the breaker on.
• Press RESET gently using a thin instrument.
If the RESET button is not pressed, the remote controller may not operate
correctly.
Remote controller
holder
Signal transmitting section
Distance of signal :
About 6m
Beep(s) is (are) heard
from the indoor unit
when the signal is
received.
Operation
display
section
ON/OFF
(operate/stop)
button
Temperature buttons
Page 4
Operation
select button
Page 4
ECONO
COOL
button
Page 6
FAN speed control
button
Page 5
VANE control
button
Page 5
TIME set button
Page 6
RESET button
Page 3
• Install the remote control-
ler holder to a place where
the signal can be received
by the indoor unit.
Use the remote controller provided with the unit only.
Do not use other remote controllers.
Outdoor unit
Installing the remote controller batteries
N
AME OF EACH PART
P
REPARATION BEFORE OPERATION
1.
Remove the back lid
2.
Insert AAA
alkaline batteries
3.
Install the back lid
Indoor unit
Remote controller
TIMER mode select
button
Page 6
POWERFUL
COOL
button
Page 6
4.
Press RESET
Appearance of the outdoor unit may differ from some models.
Display section
Operation
indicator lamp
Remote
control
receiving
section
Horizontal vane
Vertical vane
Air outlet
Air fi lter
(Nano platinum fi lter)
Air inlet
Heat exchanger
Front panel
Air cleaning fi lter
Indoor unit
Emergency
operation
switch
Page 4
Air inlet
(back and side)
Refrigerant piping
Drainage hose
Air outlet
Drain outlet
JG79A282H01_en.indd 3
2009/11/27 14:21:56
