Mitsubishi Electric Mr.Slim MUZ-A17NA, Service Manual

Page: 71 / 84

71
OPERATING PROCEDURE PHOTOS
6. Removing the compressor and 4-way valve
(1) Remove the top panel, cabinet and service panel.
(Refer to 1.)
(2) Remove the back panel. (Refer to 1.)
(3) Remove the inverter assembly. (Refer to 2.)
(4) Recover gas from the refrigerant circuit.
NOTE:
Recover gas from the pipes until the pressure
gauge shows 0 PSIG.
(5) Detach the welded part of the suction and the dis-
charge pipe connected with compressor. (Photo 9)
(6) Remove the compressor nuts.
(7) Remove the compressor.
(8) Detach the welded part of 4-way valve and pipe. (Photo
8)
Photo 8
Photo 9
7. Removing the reactor
(1) Remove the top panel. (Refer to 1.)
(2) Disconnect the reactor lead wire.
(3) Remove the screws of the reactor, and remove the
reactor.
Photo 10
Screws of the reactor
Welded part of the
discharge pipe
Welded part of the
suction pipe
Welded parts of 4-way valve
R.V. coil
(For MUZ)