En-8
Operation indicator lamp
Emergency operation
When the remote controller cannot be used...
Emergency operation can be activated by pressing the
emergency operation switch (E.O.SW) on the indoor unit.
Auto restart function
If a power failure occurs or the main power is turned off
during operation, “Auto restart function” automatically
starts operation in the same mode as the one set with the
remote controller just before the shutoff of the main pow-
er. When timer is set, timer setting is cancelled and the
unit starts operation when power is resumed.
If you do not want to use this function, please con-
sult the service representative because the setting of
the unit needs to be changed.
Set temperature : 24°C
Fan speed : Medium
Horizontal vane : Auto
Note:
The first 30 minutes of operation is test run. Temperature
control does not work, and fan speed is set to High.
Emergency COOL
Stop
Each time the E.O.SW is pressed, the
operation changes in the following
order:
F
AN SPEED AND AIRFLOW
DIRECTION ADJUSTMENT
Press
to select fan speed. Each press changes
fan speed in the following order:
• Two short beeps are heard from the indoor unit
when set to AUTO.
Press
to select airflow direction. Each press
changes airflow direction in the following order:
• Two short beeps are heard from the indoor unit
when set to AUTO.
(AUTO)
(Low)
(Med.)
(High)
(Super High)
(AUTO) (1)
(2)
(3)
(4)
(5) (SWING)