5
4. Electrical Connections
The refrigerator should always be plugged
into its own individual electrical outlet.
This is recommended for best performance and
also in order to prevent the overloading of
household wiring circuits, which may cause a fire
hazard. Extension cords are not recommended.
Make sure that the outlet provides the correct voltage.
If your refrigerator has a grounding plug, use
it correctly. The 3-point plug must be inserted
into a mating 3-point grounded receptacle.
If the installation location does not have a
proper 3-point grounding wall receptacle, the
proper type must be installed. The ground
point should never be cut or removed.
If your refrigerator has an ungrounding plug, connect
the ground wire to the ground connection screw
provided at the lower rear side of the refrigerator.
Keep the electrical plug cord facing downwards
and insert the plug in fully.
When replacing the interior refrigerator light or when
taking care of the unit, pull out the electrical plug.
Do not use damaged cords or plugs or loose outlets.
Remove dust from the electrical plug.
Do not plug or unplug the electrical plug with wet hands.
If something abnormal occurs (such as a burning smell), pull
out the electrical plug and stop the refrigerator from running.
Important: For personal safety, this
appliance must be properly grounded.
ĵįġ㍍䶂
忁ᶨ㝞⅟啷⅟ⅵ暒㩫䘬暣㸸㍺柕ᶨ⭂天㍺ℍ⮰䓐䘬暣㸸㍺⎋ˤ
忁㗗䘤㎖⅟啷⅟ⅵ暒㩫⿏傥炻旚㬊⭞⹕暣嶗屈庱䘬ⓗᶨ㕡㱽ˤ
䓙㕤屈庱炻⎗傥⺽崟暣䶂䘬忶䅙炻⚈㬌侴⺽崟䀓䀥ˤ
⍰䃉㓭⺞攟⮶䶂炻ḇ㗗ᶵ⼰⬱䔞䘬ˤ
暣㸸䘬↢⎋炻ᶨ⭂天ᾅ㊩㚱怑䔞䘬暣⡻ˤ
⤪⅟㩫墅㚱㍍⛘㍺柕㗪炻婳㬋䡢ἧ䓐⬫ˤ
忁ᶨ䧖ᶱ僂⺷㍺柕炻ᶨ⭂天㍺ℍᶨᾳ⋡惵ᶱ柕⺷㍍⛘㍺⹏ˤ
⤪㝄⬱墅⟜䘬䇮ᶲ㰺㚱ᶨᾳ怑䔞䘬ᶱ僂⺷㍍⛘㍺⹏炻
ㅱ嬲㚜ᶨᾳ怑䔞⼊⺷䘬㍍⛘ˤ
㍍⛘䘬柕炻ᶵ傥↯㕟ㆾ㉮⌠↢ˤ
⤪⅟㩫㛒墅㍍⛘㍺柕㗪炻⮯㍍⛘⮶䶂㍍㕤⅟㩫⼴朊⸽悐䘬
㍍⛘⮶䶂倗㍍坢憀ˤ
ἧ暣㸸㍺柕䘬暣乄䶂㕡⎹㛅ᶳ炻⮯㍺柕䘬㍺憅㍺⇘㟡悐ˤ
㚜㎃ㆾ㩊㞍⅘䭙䄏㖶䅰㗪炻㉼↢暣㸸㍺柕ˤ
ᶵ天ἧ䓐㎵⢆䘬暣乄䶂ㆾ㍺柕ˣ㍺⎋檮≽䘬㍺⹏ˤ
⍣昌暣㸸㍺柕䘬䀘⠝ˤ
ᶵ天䓐㽽ㇳ㍺㉼暣㸸㍺柕ˤ
䘤䓇䔘ⷠ㗪炷倆⇘䃎冕␛䫱炸炻㉼ᶳ暣㸸㍺柕炻ᷕ㬊㑵ἄˤ
㲐シ烉䇚ᾅ嫱Ṣ橼⬱ℐ炻忁ᶨ姕⁁ㅱ㚱列⤥䘬㍍⛘ˤ
5. Operation
1. Automatic Defrosting
Thanks to this refrigerator’s built-in automatic
defrosting timer and heater, defrosting is
performed automatically, so there’s no need
to defrost it manually.
The water produced during defrosting passes
through the drainage hose and collects in the
drain pan at the rear of the refrigerator.
It then evaporates automatically with heat
from the compressor.
2. Ice-making
Pour water into the ice tray making sure that
it does not overflow the partitions in the tray.
Place the tray on the freezer compartment shelf.
If too much water is poured into the tray,
it will be difficult to remove the ice.
Twist the ice tray gently to remove ice cubes.
Ķįġ㑵ἄ
䓙㕤ℏ墅㚱冒≽昌曄⭂㗪☐炻⍲昌曄≈䅙☐炻
忁ᶨ⅟啷⭌ℏ䘬昌曄炻㗗冒≽忚埴䘬ˤ
⚈㬌炻ᶵ暨天Ἀ冒⍣昌曄ˤ昌曄⼴䓊䓇䘬㯜炻
㗗忂忶側悐䘬㌺㯜䭉炻㺜㳩ℍ⅟啷⭌⼴悐䘬⺊㯜䚌ℭˤ
⺊㯜䚌䘬㯜炻㚫䓙㔋䅙☐䘬䅙炻冒≽呠䘤⍣炻ᶵ暨冒嗽䎮ˤ
IJįġ冒≽昌曄
⮯㯜㲐ℍ⛐墥⅘⟲䚌䘬㭷ᶨᾳ㕡㟮ᷕ炻
㬌㗪天㲐シᶵ天ἧ㯜㹊㳩↢ˤ
䃞⼴婳㓦⛐墥⅘⭌㒙㝞ᶲ朊ˤ
⤪㯜忶⣂㗪炻⅘⟲ᶵ⭡㖻䓙墥⅘⟲䚌↮暊ˤ
⽆墥⅘⟲䚌⍾↢⅘⟲㗪炻⎗ẍ䓐≃㈕廱墥⅘⟲䚌⯙埴ˤ
ijįġ墥⅘
Summary of Contents for MR-H15R Series
Page 11: ...11 Memo ...
