4
1. Components
This illustration shows series models MR-18PA
Drain Pan
Ice Tray
LED Light
(see page 9)
Minus Ion
(see page 7)
Sliding Case
Freezer Door
Shelf
(refrigerator compartment)
Vegetable Case
Stand
Adjustable Pocket
Door Switch
Door Gaskets
Free Pocket
Egg Rack
Bottle Pocket
Door
Temperature Control
(see page 5)
2. Installation
Install on a completely flat and rigid surface.
Level the refrigerator by rotating the levelling leg located in the front of the right corner.
The refrigerator is then solidly positioned.
Leave a 3-cm space between the sides of the refrigerator.
Leave a 30-cm space between the top of the refrigerator and the ceiling.
Leave a 10-cm space between the back of the refrigerator.
Choose a location which is not exposed to the sun, which is relatively free from dust, heat and humidity,
and which offers good ventilation. This is to guarantee that the heat radiation will not be impaired.
Warning
Although R600a refrigerants are combustible, the refrigerant circuit is hermetically sealed and normally leaks will not occur.
Please also contact your local maintenance agent to follow up.
In case the refrigerant circuit is damaged, do not use any electric appliances
or fire equipment nearby, and open all windows to provide good ventilation.
Do not damage the refrigerant circuit (pipes) or drive screws into it.
Do not block the area in the vicinity of the refrigerator.
If refrigerant leaks, it may accumulate and catch fire or explode.
Warning
Corrosion control treatment may be required for the refrigerant circuit (pipe) due to generation of corrosive gases.
Contact the retail store where you purchased the refrigerator.
Use in hot spring areas
