OPERATING PROCEDURE
PHOTOS/FIGURES
(7) Install the screw cap.
(8) After attaching the safety strings for the left and right
side panels to the grille, install the side panels (Figure
9).
NOTE:
Make sure that the tabs of the side panels securely fit
into place (Figure 9).
NOTE:
Open the display cover to make sure the positioning
marks are aligned.
NOTE:
Make sure that there are no gaps between the
emergency operation switch and the side panel
(Figure 10)...
NOTE:
Make sure that the safety strings do not hang out of
the side panels.
(9) Fix with the side panel fi xing screws on the left and right
sides (Figure 10).
(10) Attach the air cleaning filters (Silver-ionized air purifier
filters), if any, to the catches on the air filters(Air purifier
filters) (Figure 11).
(11) Attach the safety strings for intake grille to the grille and
insert the grille shafts into the holes of the intake grille
(Figure 11).
(12) Close the intake grille (Figure 12).
NOTE:
Press the intake grille firmly against the grille until
a click is heard from each tab on the left and right
sides.
<Check after installing>
(1) Check that there are no gaps between the indoor unit
and the grille, or between the grille and the ceiling
surface.
NOTE:
If there are any gaps, the wind may come in and it
may cause water to drip.
(2) Check that the screw cap is installed.
(3) Check that the left and right side panels are installed
securely.
(4) Check that the emergency operation switch is installed
securely.
(5) Check that the display cover of side panel is installed
securely.
(6) Check that the filters are installed securely.
NOTE:
If the filters are not installed securely, the intake
grille may not close properly.
(7) Check that the safety strings (4 places) are attached
securely.
40
Figure 9
Attach to the
hook of grille.
Tab for opening/closing the display cover
3 places
for attaching
the tabs
3 places
for attaching
the tabs
Recess where the tab fits
Safety string
for side panel
Recess where
the tab fits
Side panel
Figure 10
Emergency
operation
switch
(E.O. SW)
E.O.
SW
Side panel fixing screw
Display cover
No gaps here
Positioning marks
Figure 12
Press 3 points.
Figure 11
Attach to the hook of grille
Safety string
for intake grille
Shaft
Insert.
Air cleaning filter
[Silver-ionized air purifier filter(option)]
Catches
OBH801
