12
Changes with
every press.
The BATHROOM MILDEW GUARD lamp lights.
The swing louvre operation starts
(blowing
set to “WIDE” and “FRONT”).
Operation stops after approximately 4 to 12 hours.
The POWER lamp and BATHROOM MILDEW
GUARD lamp turn off.
About Bathroom Mildew Guard Operation
After dehumidifying is performed until the humidity reaches 50%,
operation is performed for approximately 4 hours and then stopped
automatically. The operation time varies depending on the temperature
and humidity, but the minimum time is approximately 4 hours
(approximately 6 hours when the room temperature is 20°C or less) and
the maximum time is approximately 12 hours.
How is mildew growth suppressed?
Mildew is unable to produce new spores if dried as mycelia. The Mildew Guard feature applies
this principle. (However, the spores themselves are resilient to dry conditions.)
Installing the Dehumidifi er
Reducing Growth of Mildew in Bathroom (Bathroom Mildew Guard)
This operation is for reducing the growth of mildew by drying the inside of a bathroom to remove any humidity and droplets that
remain inside after, for example, you take a bath. This operation can also be used as a measure for tackling mildew in rooms.
Information
For effective use, keep the windows and doors of the room closed and do not ventilate the room during operation.
Operation may not be suffi ciently effective if the bathroom is spacious or because of the building materials used for the
fl oor and walls of the bathroom.
Drops of water may remain in places where water collects easily.
Mildew may grow depending on the room conditions and the type of mildew.
Example: Where air circulation is poor such as beneath a container or the like in the bathroom or at the back of a cupboard
or behind furniture in the bathroom.
This operation cannot dry locations where the airfl ow cannot reach such as inside a bathtub and beneath a container.
This operation cannot remove existing mildew and water scale, or slime in the drain outlet.
If this operation is used in conjunction with the off timer, operation may stop before drying is complete.
If water remains in the
bathtub, cover the bathtub.
Set air to be blown from
the front of the unit.
Adjust the orientation of
the unit so that air fl ows
toward the whole room.
<Preparation> Install the dehumidifi er in the dressing room
Use the “downward blowing louvre” operation
.
1
Press
.
2
Press
to select
“BATHROOM MILDEW GUARD”.
<When you want to abort the operation>
When you want to end the operation partway through:
Press the POWER switch (OFF).
When you want to switch to another operation:
Press any one of the “INTELLIGENT LAUNDRY”,
“DEHUMIDIFYING”, and “MODE” switches.
Install the unit in the dressing room (entrance to
the bathroom).
(Do not install the unit inside the bathroom.)
Humidity 50%
Operation time
Swing direction
Start of
operation
End of
operation
WIDE
FRONT
Varies depending on the
temperature and humidity
4 hours
“Identifi cation of Black Mold”
[Research paper by Dr.K.Abe of the
Environmental Biology Research Center]
Rough Guide on Usage
Location to be dehumidifi ed
Size
Bathroom (ba
dressing room)
Up to approximately 7 m
2
(size of
ba dressing room)
Room
Up to 9 m
2
For more effective operation, use the unit within the above ranges.
Do not use the unit in a bathroom or other
location where it is likely to come into contact
with water, or wash it with water.
The unit does not have a drip-proof or water-proof
structure. Water coming into contact with the unit may
result in a fi re due to a short circuit, or an electric shock.
CAUTION
The louvre operates in the “WIDE” swing direction
until the humidity drops to 50% and then
automatically switches to the “FRONT” swing
direction. The swing direction can be changed
according to preference.
The airfl ow rate cannot be set because it is
changed automatically. Do not use this operation in
conjunction with other operations.
P9
P14
P14
e̲mj̲ez6cx̲s1.indb 12
e̲mj̲ez6cx̲s1.indb 12
2010/05/17 10:28:15
2010/05/17 10:28:15