background image

4

Meanings of the graphic symbols used in this manual and on 

the unit are explained below.

Precautions

Precautions

Forbidden

Keep away 
from fi re

Do not 
subject to 
water

Do not 
disassemble

Always 
follow the 
instructions

The following diagrams indicate circumstances 
where danger can result from mishandling the unit.

WARNING

CAUTION

Mishandling may result in 
fatal or serious injuries.

Mishandling may result in 
injuries or damage to your 
home or property, etc.

Do not damage or modify the power 
cord or plug. Do not use power sockets 
in which the plug fi ts loosely. 

Do not modify, bundle, twist, bend or heat the 
power cord. Do not place under objects or 
use with the end close to the plug bent.
(Keep pets from biting the cord.)

The cord may be damaged 

resulting in fi re, 

electric shock or heat generation

Do not use extension cords or 
multiple head adapters.

This may 

result in fi re, electric shock or 

malfunctions

.

Do not start/stop the unit by 
plugging/unplugging the power cord.

This may 

result in fi re and/or electric shock

.

Do not put the unit near heat-generating 
devices (such as stoves, fan heaters, etc.).

The plastic parts may melt and 

cause fi re

.

Do not insert your fi ngers, objects, 
or things that burn 
easily such as paper 
into an air outlet or air 
intake. Do not touch 
the swing louvre. 

There is an internal heater, and such actions 
may 

result in a fi re, electric shock, burn, or 

malfunction

. Also, the internal fan rotates at 

high speeds, and such action may 

result in an 

injury or malfunction

.

Do not attempt to repair, 
disassemble, or modify the unit.

This may 

result in fi re and/or electric shock

Refer servicing to your dealer or Mitsubishi 
Electric Service Centre.

Exclusively use 230 to 240 V AC 
power sockets for the power supply. 

Failing to do so may 

result in a fi re and/or 

electric shock

Wipe dust off the power plug and 
insert the plug fi rmly.

If the plug is not fully inserted into the socket, 
dust may gather on the connectors which may 

cause fi re and/or electric shock

.

Should abnormal symptoms occur 
(a burning smell, etc.), switch off 
the unit and unplug it from the 
socket.

Continuing to operate the unit may 

result in 

fi re, electric shock, or malfunctions

. Contact 

your dealer or Mitsubishi Electric Service 
Centre for consultation.

Remove water that has collected in 
the tank.

Drinking the water or using it for other purposes 
may 

cause illness and/or unforeseen 

accidents

.

WARNING

e̲mj̲15bx̲a1.indb   4

e̲mj̲15bx̲a1.indb   4

2008/08/19   17:58:43

2008/08/19   17:58:43

Summary of Contents for MJ-E15BX-A1





























Reviews: