3
3. Names and Functions of Each Part
3.1 Screen Configuration
The Management screen consists of the following parts:
Management screen
Display & operation section: Displays and operates the function selected at the function select buttons
Function select buttons:
Select the function
Display unit buttons:
Select the display unit for each function
Floor switching buttons:
Switches the floor
Hard copy button:
Prints the currently displayed screen. Printing can be performed while a function is operating
Message bar:
Displays operation commands, current time, and system status
There are two system statuses: Serious failure and Minor failure
Serious failure · · · · · · · · Abnormality at IFU, G/W. Indicates that part of the system is not operating normally.
Slight failure · · · · · · · · · · Abnormality in Air conditioning unit. Indicates that part of the system is not operating normally.
3.2 Operations
Mouse operation
The following description assumes that a mouse is used as the pointing device. When using another pointing device, read the
description for that device.
Operation on the screen is the same.
The keyboard can also be used to input characters and numerics.
Move the mouse while viewing the arrow (mouse pointer) on the screen.
Use the left mouse button only.
The following describes the operations:
Click:
Pressing and releasing the mouse button once is called “click”.
This operation is used when selecting a button.
Double click: Pressing and releasing the mouse button twice in rapid succession is called “double click”.
Drag:
The mouse pointer is moved to an icon and the left mouse button is held down. When the mouse is moved in
this state, the icon moves as if it were being dragged. This operation is called “drag”. The icon can be left at the
new position by releasing the left mouse button.
Keyboard:
Primarily used when entering password, characters, or numerics.
Function select buttons
Hard Copy button
Floor switching buttons
Display unit buttons
Display & operation section
Message bar
