Mitsubishi Electric MELSERVO-J4 series, Instruction Manual

Page: 430 / 646

428
11 OPTIONS AND PERIPHERAL EQUIPMENT
11.16 EMC filter (recommended)
11.16
EMC filter (recommended)
When connecting multiple servo amplifiers to one EMC filter, refer to section 6.4 of "EMC Installation
Guidelines".
It is recommended that one of the following filters be used to comply with EN EMC directive. Some EMC filters have large in
leakage current.
Combination with the servo amplifier
*1 To use any of these EMC filters, the surge protector RSPD-250-U4 (Okaya Electric Industries) is required.
*1 To use any of these EMC filters, the surge protector RSPD-500-U4 (Okaya Electric Industries) is required.
Servo amplifier Recommended filter (Soshin Electric) Mass [kg]
Model Rated current [A] Rated voltage
[VAC] Leakage current
[mA]
MR-J4-10GF(-RJ) to
MR-J4-100GF(-RJ) HF3010A-UN
*1
10 250 5 3.5
MR-J4-200GF(-RJ)
MR-J4-350GF(-RJ) HF3030A-UN
*1
30 5.5
MR-J4-500GF(-RJ)
MR-J4-700GF(-RJ) HF3040A-UN
*1
40 6.5 6
MR-J4-11KGF(-RJ)
MR-J4-15KGF(-RJ)
MR-J4-22KGF(-RJ) HF3100A-UN
*1
100 12
MR-J4-60GF4(-RJ)
MR-J4-100GF4(-RJ) TF3005C-TX 5 500 5.5 6
MR-J4-200GF4(-RJ) to
MR-J4-700GF4(-RJ) TF3020C-TX 20
MR-J4-11KGF4(-RJ) TF3030C-TX 30 7.5
MR-J4-15KGF4(-RJ) TF3040C-TX 40 12.5
MR-J4-22KGF4(-RJ) TF3060C-TX 60
MR-J4-10GF1(-RJ) to
MR-J4-40GF1(-RJ) HF3010A-UN
*1
10 250 5 3.5
Servo amplifier Recommended filter (COSEL) Mass [kg]
Model Rated current [A] Rated voltage
[VAC] Leakage current
[mA]
MR-J4-11KGF(-RJ) to
MR-J4-22KGF(-RJ) FTB-100-355-L
*1
100 500 40 5.3
MR-J4-22KGF4(-RJ) FTB-80-355-L
*1
80 500 80 5.3