Mitsubishi Electric MELSEC iQ-R Series, Programming Manual

Page: 1578 / 2110

1576
17 CC-LINK IE CONTROLLER NETWORK INSTRUCTIONS
17.1 Remote RUN
17
CC-LINK IE CONTROLLER NETWORK
INSTRUCTIONS
This chapter describes the instructions used commonly by MELSEC iQ-R series modules. For the instructions
when MELSEC-Q series modules are used, refer to the manuals for each module used and create programs.
For precautions when using modules, refer to the following.

MELSEC iQ-R Module Configuration Manual
17.1
Remote RUN
J(P).RRUN, G(P).RRUN, Z(P).RRUN
These instructions execute remote RUN for the programmable controller on another station.
■
Execution condition
Ladder ST
ENO:=J_RRUN(EN,J,s1,s2,s3,s4,d);
ENO:=JP_RRUN(EN,J,s1,s2,s3,s4,d);
ENO:=G_RRUN(EN,U,s1,s2,s3,s4,d);
ENO:=GP_RRUN(EN,U,s1,s2,s3,s4,d);
ENO:=Z_RRUN(EN,J/U,s1,s2,s3,s4,d);
ENO:=ZP_RRUN(EN,J/U,s1,s2,s3,s4,d);
FBD/LD
Instruction Execution condition
J.RRUN
G.RRUN
Z.RRUN
JP.RRUN
GP.RRUN
ZP.RRUN
RnCPU RnENCPU
RnSFCPU RnSFCPU RnPCPU RnPCPU
(Standard) (Safety) (Redundant) (Process)
(J/U) (s1) (s2) (s3) (s4) (d)
EN ENO
J/U
s1
d
s2
s3
s4