Mitsubishi Electric MELSEC iQ-F FX5UC Series User Manual Download Page 78

Page: 78 / 282

3 PART NAMES
3.2 I/O Module

Powered input/output module

(Unit: mm)

No.

Name

Description

[1]

Extension connector cover (for
preceding module)

Cover for protecting the extension connector cover (for preceding module).

[2]

Terminal block cover

Cover for protecting the terminal block.
The cover can be opened for wiring. Keep the cover closed while equipment is running (power is on).

[3]

POWER LED

Indicates whether the powered input/output module are powered or not.
On: Powered
Off: Not powered or hardware error

[4]

Input display LED

Turns on when input is on.

[5]

Output display LED

Turns on when output is on.

[6]

Extension connector cover

Cover for protecting the extension connector.
Connect the extension cable of an extension module to the extension connector under the cover.

[7]

Extension connector (for preceding
module)

Connector for connecting the supplied extension cable that connects to the preceding module (the CPU
module side).

[8]

Terminal block mounting screws

Gradually loosen the left and right screws (alternatingly) to remove the upper part of the terminal block.

[9]

Terminal

Terminals for power, input, and output.

shows a function grounding terminal.

For details on the terminal layout, refer to



Page 129 Powered I/O Module.

[10]

Extension connector

Connector for connecting the extension cable of an extension module.

[10]

[1]

[7]

[2]

[8]

[9]

[8]

[9]

[8]

[4]

[5]

[6]

[3]



4.5 mounting hole

80 (mounting hole pitch)

140 (mounting hole pitch)

With the cover removed

Summary of Contents for MELSEC iQ-F FX5UC Series



























































































































































































































































































Search results

Summary of Contents for MELSEC iQ-F FX5UC Series

Reviews:

Related manuals for MELSEC iQ-F FX5UC Series

Brands by name

Popular brands

Mitsubishi Electric MELSEC iQ-F FX5UC Series, User Manual

Search results

Summary of Contents for MELSEC iQ-F FX5UC Series

Reviews:

Related manuals for MELSEC iQ-F FX5UC Series

Brands by name

Popular brands