English-40
Specifi cations
Specifi cations (MDT521S)
Product Specifications
LCD Module
Frequency
Pixel Clock
Viewable Size
Input Signal
PC-Input:
VIDEO Input:
AUDIO Input:
CAT5:
RS-232C:
Output Signal
PC-Output:
VIDEO Output:
AUDIO Output:
Speaker Output:
CAT5:
RS-232C:
Resolutions Supported
Power Supply
Power Consumption
Operational
Environment
Storage
Environment
Dimension
Weight
Wall mounting interface
Complied Regulatory
and Guidelines
Power Management
Plug & Play
Accessories
Note:
Technical specifications are subject to change without notice.
**: When installing the monitor with its screen facing up, ensure that the fan is always running.
Diagonal:
Pixel Pitch:
Resolution:
Color:
Brightness:
Contrast Ratio:
Response time:
View Angle:
Horizontal:
Vertical:
Video:
Sync:
Input-terminal:
In:
In:
Video:
Sync:
Output-terminal:
Out:
Out:
Power Save:
Temperature:
Humidity:
Temperature:
Humidity:
Net:
Gross:
Net:
Gross:
Analog Input
52" / 132.2 cm
0.600 mm
1920 x 1080 dots (2070000 dots)
Over 16 million colors (depending on video card used)
700 cd/m
2
(typ.)
2000:1
8 ms (G to G)
Up and Down 178°, Left and Right 178° @CR>10
15.625 / 15.734, 31.5 - 91.1 kHz
50.0 / 58.0 - 85.0 Hz
13.5 -165.0 MHz
1152.0 x 648.0 mm / 45.4 x 25.5 inches
Analog RGB Video: 0.7 Vp-p
Input impedance 75 ohm
Separate HV sync: TTL level (Pos./Neg.), Sync-on-green, Composite Sync (0.3Vp-p)
Input Impedance 2.2K ohm
BNC (R,G,B,H,V), 15 Pin Mini D-sub
Composite: 1.0 Vp-p
Input impedance 75ohm BNC and RCA-PINJACK-INPUT
Y/C Y: 1 Vp-p C: 0.286 Vp-p Input
Impedance 75 ohm S-TERMINAL-INPUT
Component: 1.0 / 0.7 Vp-p
Input Impedance 75 ohm BNC-INPUT
RCA PIN-JACK L/R INPUT x 2, STEREO Mini Jack INPUT x 1
Modular connector 8 pin
9 Pin Mini D-sub
Analog RGB Video: 0.7 Vp-p with 75 ohm terminated
Separate HV sync: TTL level (Pos./Neg.)
15 Pin Mini D-sub
BNC-OUTPUT x 1, Composite 1.0 Vp-p with 75 ohm terminated
RCA PIN-JACK L/R OUTPUT x 1, 0.15 Vrms with 47k ohm terminated
External Speaker Jack 7 W + 7 W (8 ohm)
Modular connector 8 pin
9 Pin Mini D-sub
640 x 480 at 60 Hz to 85 Hz
800 x 600 at 50 Hz, 60 Hz to 85 Hz
1024 x 768 at 50 Hz, 60 Hz to 85 Hz
1280 x 768 at 50 Hz, 60 Hz to 85 Hz
1360 x 768 at 50 Hz, 60 Hz to 85 Hz
1280 x 1024 at 60 Hz to 85 Hz
1600 x 1200 at 60 Hz
1920 x 1080 at 60 Hz*
( * : Recommended Resolution)
1920 x 1200 at 60 Hz
NTSC,PAL,SECAM,4.43NTSC,PAL60 Component:480i,480p,720p,1080i,1080p
3.9 - 1.7 A @100 - 240 V AC, 50 / 60 Hz
380 W
5 W or less (Power button ON/Main power switch ON/Sleep mode with CAT5 input)
3 W or less (Power button ON/Main power switch ON/Sleep mode with other input)
2 W or less (Power button OFF/Main power switch ON)
Landscape: 5 - 40 °C / 41-104 °F, Portrait : 5 - 35 °C / 41 - 95 °F, Face-up: 5 - 35 °C / 41 - 95 °F**
20 - 80 % (Without condensation)
-20 - 60 °C / -4 - 140 °F
10 - 90% (Without condensation)/90%-3.5%x(Temp-40°C) regarding over 40°C
1202 mm (W) x 698 mm (H) x 122 mm (D) / 47.32" (W) x 27.48" (H) x 4.80" (D)
1405 mm (W) x 951 mm (H) x 275 mm (D) / 55.31" (W) x 37.44" (H) x 10.83" (D)
88.2 lbs / 40 kg (Approximately)
108.0 lbs / 49 kg
8 Holes (200 mm pitches)
Optional Multi-purpose Fix Mount
UL60950-1/C-UL/EN60950-1/FCC-B/DOC-B/EN55022-B
EN55024/EN61000-3-2/EN61000-3-3/C-Tick/CE/BSMI/GOST-R
VESA DPM
VESA DDC2B, DDC/CI
User’s Manual, Power Cord, Video Signal Cable, Remote Controller, AAA Battery x 2,
Clamper x 2 (To prevent from falling), Clamper x 3 (For securing cables), Clamper x 2
(For securing the power cord and HDMI cable), Screw for CLAMPER x 2, CAT5 Tx BOX, CD-ROM
Digital Input
25.0 -165.0 MHz
TMDS
HDMI, DVI-D
