manualshive.com logo in svg

Mitsubishi Electric MAC-568IF-E, Installation Manual, Page: 6 / 20

Share
Download
Mitsubishi Electric MAC-568IF-E Installation Manual Download Page 6

6

[Precautions for installation, setting up, or use of the Wi-Fi interface]

 Caution

(Improper handling may have consequences, including injury or damage to building.)

Be sure not to do.

•  Do not mount the Wi-Fi interface where 

children can reach. 

It can cause injury.

•  Do not step on unstable step stool to set 

up or clean the Wi-Fi interface. 

It may cause injury if you fall down.

•  Do not use the Wi-Fi interface near other 

wireless devices, microwaves, cordless 

phones, or facsimiles. 

It can cause malfunctions.

Note

•  Please ensure that the Router supports the 

WPA2-PSK(AES) encryption setting before 

installation for this Wi-Fi interface begins.

•  The end user should read and accept the 

terms and conditions of the Wi-Fi service 

before installation of this Wi-Fi interface 

begins.

•  The Router may be required to complete 

connection of this Wi-Fi interface to the Wi-Fi 

service.

•  This Wi-Fi interface should not be installed 

and connected to any Mitsubishi Electric 

System which is to provide application critical 

cooling or heating.

•  Please write down the model information and 

more on the first page "Setting Information", 

when you install this Wi-Fi interface.

•  Before transferring or disposing of the Wi-Fi 

interface, it has to be reset to the factory 

default.

•  Dismantling the indoor unit 

Please refer to the indoor units “service 

manual” for detailed instructions for accessing 

the control adaptor connector CN105 on the 

indoor unit control PCB.

Mitsubishi Electric’s Wi-Fi interface is designed for communication to Mitsubishi Electric’s  
Wi-Fi service. Third party Wi-Fi interfaces cannot connect to Mitsubishi Electric’s Wi-Fi 
service. Mitsubishi Electric is not responsible for any (i) underperformance of a system or 
any product;  (ii) system or product fault; or (iii) loss or damage to any system or product; 
which is caused by or arises from connection to and/or use of any third party Wi-Fi 
interface or any third party Wi-Fi service with Mitsubishi Electric equipment.

For the latest information regarding Wi-Fi Control:
New Zealand based enquiries please visit: www.mitsubishi-electric.co.nz/wifi 
Australian based enquiries please visit: www.mitsubishielectric.com.au/wifi

Summary of Contents for MAC-568IF-E





















Reviews:

No comments