Mitsubishi Electric MAC-558, User Manual

Page: 18 / 31

18 18
Cool if Room Rises Above Set Maximum Temperature
1. Select ‘Cool if room rises above set maximum
temperature’ under ‘Add a rule’
2. Choose what time period you would like the rule to run.
By default it is set at 9pm to 7am. Note that the 7am is the
following day.
3. Set a maximum temperature limit – the heat pump will
automatically turn on if the room temperature goes above the
maximum temperature. By default this is 26°C. You may set
this between 18°C and 38°C.
4. Next, select which days you would like this rule to run. By
default all days are selected.
5. Lastly select ‘Add’ to add this rule to your rule set.
*Please note, your heat pump/air conditioner must be off for
min./max. rules to apply.
Select “Add” to add this max.
temp rule to rule set.
Zones will not be changed.
Open Lounge and Bedroom 1
zone and close off all others.
Zone Control
Should your Wi-Fi Control be connected to a compatible
ducted system and zone controller you will have a further
setting.
You can select to change the zone settings with this rule, or
to leave the zones unchanged/what they were previously set
to.
When actioned, Wi-Fi Control will ensure comfort is delivered
only to where it is needed most, closing off/ opening up
zones as required and ensuring energy is not wasted on
vacant area/zones.
Zones now displaying a tick beside them will be opened
(Zones displaying an eye symbol
are zones which are not
visible for operation – if one of these zones is selected for this
rule to apply, it will still open and will cause an over-ride and
this zone will be displayed in the heat pump control screen).
Important
When minimum / maximum temperature rules are set, zones
will remain as per the rule settings.