manualshive.com logo in svg

Mitsubishi Electric M350, User Manual, Page: 12 / 88

Share
Download
Mitsubishi Electric M350 User Manual Download Page 12

12 - 

 Getting started

Ending a call:

Holding your phone (while making or receiving a call)

The standby display

When switched on the mobile searches connection with the network. When the

connection is established a tone sounds and the network and/or service provider

name or logo are displayed together with the time and date, the signal strength and

the battery charge level.  If the mobile cannot find a valid network the signal strength

and the operator name are not displayed.

The four arrows indicate features can be reached via the four arrows on the cursor key.

The oval symbol in the middle of the cursor key shows the Menu can be reached

by pressing on the OK key (in the middle of the cursor key).

Wap

 

and 

Message

 indicate you can directly access the Wap feature and the message services

by pressing on the

 

softkeys. 

 shows your mobile is attached to a GPRS network.

Keypad lock

When activated the keypad lock feature prevents accidental actions (e.g. camera activation) being

made by while the phone is carried in a pocket  or a bag for instance. Incoming calls can however

be received and answered. When the call is over the keypad lock is automatically reactivated. 

To activate the keypad lock from the standby display:

To activate the keypad lock from the main menu:

To deactivate the keypad lock:

Turning the phone off

A tone sounds to confirm your action. A Goodbye screen is displayed while the mobile switches

off (you can set a Goodbye melody and/or picture to be played/displayed at mobile switch off

(please see "Setting an image as a idle screen, a welcome or a goodbye screen from the pic-

tures folder", page 57 and "Melodies", page 57). 

  1

Press on the On/Off key.

Please be warned that you should not, when using the hands free mode, put the phone to your ear.

  1

Press and hold  . 

Keypad locked

 is displayed.

  1

Press 

OK

. Select 

Settings

.

  2

Select 

Keypad

, then select 

Keypad lock

.

  1

Select 

Unlock

 and press   or press and hold  . 

Keypad unlocked

 is displayed.

  1

Press and hold the On/Off key.

Do not take the battery out of the mobile without turning the phone off. Data might be lost. Should this happen

a first-aid kit symbol is displayed at next activation of the mobile.

Recommended way

Avoid

covering the up-

per back half of the

phone so as to 

allow maximum

emision and

reception quality.

Summary of Contents for M350

























































































Reviews:

No comments