Mitsubishi Electric LT-37131, Service Manual

Page: 8 / 46

Page 8
MODELS: LT-37131 / LT-37132 / LT-46131 / LT-46231
Front Panel Guide
FRONT PANEL
1) SYSTEM RESET 1 - Reboots Set
(Same as Cycling AC Power)
Power LED will flash for about
1 minute.
2) A/V RESET
2
<GUIDE>
Resets all Customer Audio/Video Settings
FORMAT GUIDE INP UT
ENTER CANCEL
SYSTEM
RESET
MENU
V OLUME
ADJUS T
CH
ADJUS T
3) INITIAL 2 <INPUT>
Resets all Customer Menu and
A/V Settings
LED DIAGNOSTICS 3 <INPUT+MENU>
In case of failure, a 2 digit error code will
be indicated by the POWER/TIMER LED.
(See section on LED Diagnostics)
1 Perform while the set is either On or Off.
2 Perform while the set is On.
3 Perform while the set is Off.
Initial Factory Default Customer Settings
Setup Menu Input Name Menu (For VLP33)
Language (Idioma) English
NetCommand Menu (VLP33+)
Memorize Channels -- Edit (For VLP33+) Review
Ant1 Air -- Input Name --
Ant1 Cable -- Input-1 --
Ant2 Air -- Input-2 --
Ant2 Cable -- Inout-3 --
Clock Comp-1 --
Clock Setting Manual Comp-2 --
Time 12:00PM Comp-3 (For VLP33+) --
Date 1/1/2006 HDMI-1 --
Time Zone Eastern HDMI-2 --
Daylight Savings Applies PC DVI (For VLP33) Digital
Timer Gray out AV Receiver Learn (For VLP33+) Learn button On,
Connect button
gray out
Timer Off Connect TV Audio Out (For VLP33+) None (Gray out)
Day Daily Icon Order (For VLP33+) --
Time 12:00PM PC DVI input (For VLP33+) Digital
Device ANT-1
Channel 2
Energy Mode Fast Power On
Demo mode Gray out (Turn
Demo Mode off)
Software Version VLP33(+) XX.XX
(Depends on SW
version)
-1 -2