English-22
USB cable (commercially available)
CAT5 Tx BOX
(option)
Signal cable (Mini D-SUB 15-pin to Mini
D-SUB 15-pin) (accessory)
CAT5 cable (commercially available)
Computer
Monitor with CAT5 Rx
BOX (option)
RS-232C cable
(commercially available)
* As necessary
P-5
Installing the optional module
Carry out as necessary
CAT5 for long-distance connection
or multiple-monitor connection
The CAT5 video connection function is for transmitting the
analog RGB video signal of the computer and the control signal
of the monitor over a long distance using CAT5 cables.
The computer can control the monitor via the optional CAT5 Tx
BOX and the CAT5 Rx BOX that is mounted on LDT551V.
CAUTION:
Never connect network devices (such as a hub and a computer
for LAN) to the CAT5 IN and OUT connectors of the CAT5 Kit. If
they are connected, the network devices themselves, CAT5 Tx
BOX, CAT5 Rx BOX, and monitor may be damaged.
1. Installation of the USB driver for CAT5
serial communication control
To connect the computer and the CAT5 Tx BOX via USB
interface, it is necessary to install the USB driver to the
computer from the CD-ROM supplied with the CAT5 Kit (option).
(Installing the USB driver isn’t necessary when the
communication control isn’t used or the RS-232C cable is used
for connection.)
OS supported: Windows
®
XP, Windows Vista
®
, Windows
®
7
How to install:
Start the “PL2303_Prolifi c_DriverInstaller_v
***
.exe” fi le in the
Windows folder on the CD-ROM supplied with the CAT5 Kit
(option) and install the driver according to the instructions
displayed on the screen.
NOTE:
It is unnecessary to install the USB driver if you don’t use the
communication control or the USB driver. When the window
asking you to install the driver is displayed, select cancel.
As for the latest driver for the Windows operating system,
check the operation of the interface IC “PL-2203” in advance,
referring to the website of Prolifi c Technology Inc. Prolifi c
Technology Inc. and Mitsubishi don’t assume any responsibility
or liability for any damages incurred by the user.
Operation check by Mitsubishi
•
File name: PL2303_Prolifi c_DriverInstaller_v110.zip, Release
date: December 2, 2009, Version: V1.1.0
Windows XP (32 bits): Operated
Windows Vista (32 bits): Operated
Windows 7 (32 bits): Operated
2. Mounting the CAT5 Rx BOX on the
monitor
1. Turn off the power switch of the monitor and disconnect the
power cord.
CAUTION:
Be sure to disconnect the power cord to prevent breakdown
and electric shock.
2. Remove the cover on the option slot of the monitor.
Use a Philips screwdriver to unscrew the screw for easy
removal of the cover. The removed screw is used in step 4.
3. Mount a CAT5 Rx BOX (option) on the option slot of the
monitor.
CAUTION:
Ensure that the CAT5 Rx BOX is positioned and oriented
correctly and insert it as far as it will go. If you insert it in
wrong position or wrong orientation, it may be damaged.
4. Secure the CAT5 Rx BOX using the screw (two screws).
Secure the CAT5 Rx BOX fi rmly using the screw that was
unscrewed in step 2 so that the CAT5 Rx BOX won’t drop
off.
3. Connection of the CAT5 video
connection function
There are two cases of connection.
1) Connection to one monitor
1. Connect the computer and the CAT5 Tx BOX (option) using
a commercially available USB cable.
2. When the USB connector isn’t used for the communication
control, connect with an RS-232C cable and set the input
selection switch on the CAT5 Tx BOX to the RS-232C side.
NOTE:
To supply a power to the CAT5 Tx BOX, connect a USB
cable also.
CAT Rx BOX
Installation of the optional module
Install the optional module to the option slot of this monitor
following the precautions and procedures described in the
manual supplied with the module.
Optional module
