Mitsubishi Electric LaserVue L75-A81, Owner'S Manual, Page: 43 / 100

4. TV Menus
41
In the U.S. call 1(877) 675-2224 for assistance.
Adjust, continued
PerfectColor
PerfectColor Sliders
Adjusts the saturation (intensity) of six colors for the
current image source.
PerfectTint Sliders Adjusts six hues for the current image source
Using PerfectColor:
Highlight the PerfectColor™ icon and press ENTER to display the PerfectColor menu. Settings are retained
independently for each TV input.
Using PerfecTint
• To switch between PerfectColor™ and PerfecTint™ adjustments, highlight Adjust Mode and press .
• Press to move from one color bar to the next.
• Press to change settings.
• Press
CANCEL to restore default settings.
• Press MENU to return to the main menu.
Advanced
Picture
Advanced Picture allows you to save highly customized picture adjust-
ments for each input. Mitsubishi recommends a professional
installer make these adjustments.
Press 1. MENU. Under , highlight the Advanced Picture icon and press ENTER .
With 2. Picture Mode highlighted, press ENTER to change from blank (undefined) to ADV .
L75-A91: Choose ADV1 (daytime settings) or ADV2 (nighttime settings).
Use
3.
to highlight an option you wish to change and press
ENTER
to see the adjustment display.
Press
4.
to change settings.
Use
5.
to navigate to additional options and press to change settings.
Press
6. MENU
to return to the
Advanced Picture
menu. Press
MENU
again to close the menu and save
settings. The
Advanced Picture
adjustments will be in effect for the current input.
To use the custom Picture Mode at a later time
Press
MENU
and go to
Adjust > Picture > Picture Mode
and:
L75-A81 L75-A91
Select • SPECIAL if settings were saved by
your professional installer.
Otherwise select
•
ADV
.
Sele • ct ISF Day or ISF Nigh t if settings were
saved by your professional installer.
Otherwise select
•
ADV1
or
ADV2
.
To return to the default values for Advanced Picture
Display the
> Advanced Picture
menu and:
L75-A81 L75-A91
Highlight RESET Pic Mode and press ENTER . Highlight the 1. Advanced Picture mode to change.
H
2.
ighlight
RESET Pic Mode
and press
ENTER
.
Repeat this separately for both
ADV1
and
ADV2
.
3D Mode 3D Mode On, Off Use the On setting for video games and movies that require 3-D glasses.
This setting applies only to the current input.
Note: 3D options are available only for 1080p 60-Hz video sources
connected to an HDMI input.
Source
Format Checkerboard,
Top/Bottom
Selects the source format.
Glasses L-R Standard,
Reverse Synchronizes the 3D glasses with the image on screen to provide the
best 3D effect. Try
Reverse if Standard seems incorrect.
Glasses
Control IR Emitter,
DLP Link Selects the control type for your 3D glasses.