Mitsubishi Electric LaserVue L75-A81, Owner'S Manual, Page: 41 / 100

4. TV Menus
39
In the U.S. call 1(877) 675-2224 for assistance.
Speakers The Speakers option displays only if an A/V receiver or headphone connection has been
detected. Detection occurs on the right AVR AUDIO OUTPUT jack, the DIGITAL AUDIO OUT jack,
and any HDMI jack.
TV Turns on the internal TV speakers.
AV Receiver Turns off the TV speakers so you hear sound only from a connected A/V receiver.
Adjust the sound volume using the A/V receiver controls.
Note: When you disconnect an analog A/V receiver, be sure to change the
Speakers setting to TV to hear sound from the TV speakers.
Headphones Turns off the TV speakers so you hear sound only from connected headphones.
See “10. AVR AUDIO OUTPUT,” page 20. Adjust the sound volume using the TV’s
volume controls.
The
Headphones option displays only if you selected the name Headphones in
the New Device Found screen for the AVR AUDIO OUTPUT jack. This option is not
available if DIGITAL AUDIO OUTPUT is connected.
Bass
Controls volume of low-pitched sound from the TV speakers.
Treble Controls volume of high-pitched sound from the TV speakers.
Balance
Controls audio balance between the right and left TV speakers
Sound Mode Stereo No special audio effects from the TV speakers
Surround Modifies audio from the TV speakers.
• For monaural (non-stereo) programs, creates a simulated stereo effect.
• For stereo programs, creates a simulated surround sound effect.
Listen To
Available only
for analog
channels from
the
ANT input
Stereo The TV plays stereo broadcasts in stereo and mono broadcasts in mono. The
word
Stereo is displayed when you tune to a channel broadcasting in stereo.
Mono
Reduces background noise. Use when receiving a weak stereo audio signal. All
audio is played as mono with this setting.
SAP
(Second
Audio
Program)
Selects an additional monaural sound track not audible during normal TV viewing.
The SAP signal might be related to the program (such as a sound track in a foreign
language), or it might be unrelated (such as a weather report). If an SAP signal is
broadcast, the letters
SAP are displayed when you tune to the channel.
Language Selects the current language for a digital program from the ANT input. Each digital program may
include from zero to seven language choices.
Available only for digital channels from the ANT input.
Level Sound On, Off
Reduces differences in sound volume between programming segments, such as
the difference between regular broadcast programs and commercial segments.
Audio
To make audio adjustments:
From the • Adjust > Audio menu:
Press 1. to highlight an option
Press 2. to adjust.
While watching TV:
• Press the
MORE
key and then
9
(
AUDIO)
in the on-screen menu. Press to select
the audio option you want to change. Press to
change settings.
Adjust, continued