—18—
7
Remove the left reinforcing plate clamping screws (four PTT
screws 4 x 16, indicated by
●
; one PPT screw 4 x 16, indicated
by
▲
).
8
Remove the right reinforcing plate clamping screws (four PTT
screws 4 x 16, indicated by
●
; one PPT screw 4 x 16, indicated
by
▲
).
9
Remove the panel (front) clamping screws (five PTT screws
4 x 16, indicated by
●
).
0
Remove the cord clamping screw (one PTT screw 4 x 16,
indicated by
▲
).
(7) Light emitting board (bottom)
1
Perform the same work as in steps
1
through
6
of (5) above.
2
Perform the same work as in steps
1
and
2
of (6) above.
3
Remove the right side panel clamping screws (two PTT
screws 4 x 16, indicated by
●
).
4
Remove the left side panel clamping screws (two PTT
screws 4 x 16, indicated by
●
).
5
Remove the reactor clamping screw (one PTT screw 4 x16,
indicated by
▲
).
6
Remove the reactor (indicated by ).