Mitsubishi Electric Jet Towel JT-SB216JSH-H-E, Handbook

Page: 22 / 59

─ 22 ─
5 Remove the side panel (left) in the direction of the arrow.
Assembly precautions
• Fit the side panel (left) into the groove of the panel (back) and the
base. (Indicated by

)
• Carry out wiring after screwing the side panel (left).
Side panel (left)
6 Unscrew the clamping screw, and remove the board cover (filter).
(One PTT screw 4×6, indicated by

)
Board cover (filter)
Panel (back)
4 Unscrew the clamping screw, and remove the terminal block cover.
(One PTT screw 4×16, indicated by

)
Terminal block cover
7 Unscrew the clamping screw, and remove the terminal block fix plate
from the side panel (left).
(One PTT screw 4×16, indicated by

)
8 Disconnect the lead wires from the filter circuit board (JT-30F3).
9 Remove the spacers (four locations, indicated by  ), and then re-
move the filter circuit board (JT-30F3).
(Pinch the spacers from the back for easier removal.)
Filter circuit board
(JT-30F3)
Terminal block fix plate
Side panel
(left)