Mitsubishi Electric HS-U449, Service Manual

Page: 39 / 76

- 26 -
a
b
b
c
DRUM MOTOR
STATOR
ROTOR CASE
Side View of END RING
This side down.
LEAD
CONNECTOR
BRUSH
SPRING
BRUSH
END RING
UPPER
DRUM ASSY
SPACER
LOWER
DRUM ASSY
Mark for ensuring
correct positioning
in re-assembly.
Fig. 2-34-1
2-34.DRUM MOTOR STATOR, BRUSH
SPRING, SPACER, ROTOR CASE,
END RING, BRUSH, UPPER DRUM
ASSY
DECK POSITION : Normal
(Removal)
1. Disconnect the LEAD CONNECTOR of the DRUM
ASSY shown in Fig. 2-34-1.
2. Remove the two screws (
a
) fastening the DRUM
MOTOR STATOR shown in Fig. 2-34-1 to remove the
DRUM MOTOR STATOR.
3. Remove the two screws (
b
) fastening the ROTOR
CASE shown in Fig. 2-34-1 to remove the ROTOR
CASE.
Note : Mark the END RING and the UPPER DRUM
ASSY shown in Fig. 2-34-1 for ensuring correct
positioning in re-assembly.
4. Loosen the hexagon screw (
c
) fastening the END
RING shown in Fig. 2-34-1 to remove the END RING.
5. Remove the BRUSH SPRING shown in Fig. 2-34-1.
6. Remove the BRUSH shown in Fig. 2-34-1.
7. Remove the UPPER DRUM ASSY shown in Fig. 2-34-
1.
8. Remove the SPACER shown in Fig. 2-34-1.