Mitsubishi Electric HS-U449, Service Manual

Page: 37 / 76

- 24 -
TAPE GUIDE ASSY (SP)
TAPE GUIDE ASSY (TU)
Fig. 2-32-1
GUIDE CATCHER (SP)
GUIDE CATCHER (TU)
Front of
MAIN PLATE ASSY
Back of
MAIN PLATE ASSY
Apply grease (MULTEMP AC-DM)
to the parts marked by .
Fig. 2-32-2
2-32.TAPE GUIDE ASSY (SP),
TAPE GUIDE ASSY (TU)
DECK POSITION : Normal
Remove the following parts before replacing the TAPE
GUIDE ASSY (SP) and (TU). Refer to the corresponding
items to install them.
• STAY PLATE (Item 2-2)
• BOTTOM ASSY (Item 2-3)
• MOTOR HOLDER (Item 2-16)
• PINCH ARM CAP (Item 2-17)
• PINCH UNIT (Item 2-17)
• BRAKE CAM PLATE (Item 2-19)
• BRAKE BELT (SP) (Item 2-23)
• BELT HOLDER (Item 2-23)
• BELT LEVER (Item 2-24)
• TENSION ARM (Item 2-25)
• SPACER PLATE (Item 2-30)
• LOADING ARM ASSY (TU) (Item 2-30)
• LOADING ARM ASSY (SP) (Item 2-30)
• A/L LEVER (Item 2-31)
(Removal)
1. Loosen the TAPE GUIDE ASSY (SP) shown in Fig. 2-
32-1 (turn it fully in the unloading direction) to remove
it.
2. Loosen the TAPE GUIDE ASSY (TU) shown in Fig. 2-
32-1 (turn it fully in the unloading direction) to remove
it.
(Installation)
1. Apply grease (MULTEMP AC-DM)[859D055O90] to
the specified parts on the MAIN PLATE ASSY in Fig.
2-32-2.
2. Install the TAPE GUIDE ASSY (SP) shown in Fig. 2-
32-1.
3. Install the TAPE GUIDE ASSY (TU) shown in Fig. 2-
32-1.
4. Perform from “3-2-1. GUIDE ROLLER Adjustment
Check” to “3-2-5. Flatness Check of FM Waveform” of
“3. Interchangeability Adjustment of the Mechanism.”