EN-15
1. Connect one end of the optional video cable to the
VIDEO IN terminal of the projector.
2. Connect the other end of the video cable to the video
output terminal of the video equipment.
•
Also read the instruction manual of the equipment to be connected.
•
Contact your dealer for details of connection.
When a TV tuner or VCR is connected:
When you use this projector with a TV tuner or VCR connected, no image may appear or a message of NO SIGNAL
may appear on the screen when you change the channel via any channel that is not being received. In such a case,
set the channels of the TV tuner or VCR again. To avoid such symptom, use the TV tuner or VCR with its channel skip
function (that is a function not to display channels that are not being received) enabled.
Connecting to a DVD player or HDTV decoder
To connect this projector to video equipment that has component video output terminals, such as a DVD player, use
the COMPONENT VIDEO IN terminals.
•
The terminal’s names Y, P
B
, and P
R
are given as examples of when a HDTV decoder is connected.
•
The terminal’s names vary depending on the connected devices.
•
Images may not be projected correctly depending on the type of the DVD player you use.
•
Though it may take some time before an image is displayed on the screen depending on the type of the input signal, such
symptom is not a malfunction.
Connecting to a video player, etc.
When the video equipment is equipped with the
S-video output terminal, make the connection as
follows:
1. Connect one end of the optional S-video cable to the
S-VIDEO IN terminal of the projector.
2. Connect the other end of the S-video cable to the S-
video output terminal of the video equipment.
Viewing video images (continued)
2. To video output
Terminal
Video cable
(option)
1. To VIDEO IN Terminal
Video player, or the like
2. To S-video output
Terminal
S-video cable
(option)
1. To S-VIDEO IN Terminal
Video player, or the like
C
B
/P
B
Y
C
R
/P
R
Component cable (option)
DVD player or HDTV decoder
Y
C
B
/P
B
C
R
/P
R
