Mitsubishi Electric GOT 1000 Series, Connection Manual

Page: 226 / 436

5 - 12
5. CONNECTION TO OMRON TEMPERATURE CONTROLLER
5.4 GOT Side Settings
5.4 GOT Side Settings
5.4.1 Setting communication
interface (Communication
settings)
Set the channel of the equipment to be connected to the
GOT.
1.
Select [Common] [Controller Setting] from the
menu.
2.
The Controller Setting window is displayed. Select the
channel to be used from the list menu.
3.
Set the following items.
• Manufacturer: OMRON
• Controller Type: OMRON THERMAC/INPANEL
NEO
• I/F: Interface to be used
• Driver: OMRON THERMAC/INPANEL NEO
4.
The detailed setting is displayed after Manufacturer,
Controller Type, I/F, and Driver are set.
Make the settings according to the usage
environment.
5.4.2 Communication detail settings
Click the [OK] button when settings are completed.
POINT POINT POINT
The settings of connecting equipment can be
confirmed in [I/F Communication Setting].
For details, refer to the following.
1.1.2 I/F communication setting
5.4.2 Communication detail settings
Make the settings according to the usage environment.
2.
3.
4.
Click!
Item Description Range
Transmission Speed
Set this item when change the
transmission speed used for
communication with the
connected equipment.
(Default: 9600bps) 9600bps,
19200bps,
38400bps,
57600bps,
115200bps
Data Bit
Set this item when change the
data length used for
communication with the
connected equipment.
(Default: 7bits)
7bits/8bits
Stop Bit
Specify the stop bit length for
communications.
(Default: 2bits)
1bit/2bits
Parity
Specify whether or not to
perform a parity check, and
how it is performed during
communication.
(Default: Even)
None
Even
Odd
Retry
Set the number of retries to be
performed when a
communication error occurs.
(Default: 0time)
0 to 5times
Timeout Time
Set the time period for a
communication to time out.
(Default: 3sec)
3 to 30sec
Delay Time
Set this item to adjust the
transmission timing of the
communication request from
the GOT.
(Default: 2ms)
0 to 300 (ms)
Format
Select the communication
format.
(Default: 1)
format 1: only continuous
access
format 2: continuous and
random access
1/2