C o n f i g u r a t i o n s o f t w a r e a n d u t i l i t i e s
FT5000 HANDBOOK 7/23
EMP console in command state
EMP console in redirect state
The screen-shot above shows the EMP console window in redirect state with the terminal window.
The text that appears on the server monitor displays in the redirect window.
Availability of the various EMP console features is determined by two things: the EMP access
mode selected during configuration in the System Management Submenu of the BIOS Server
Menu, and whether the server's COM2 port is configured for console redirect in BIOS. The three
EMP access modes are disabled, pre-boot, and always active.
EMP console access modes (server configured for console redirect)
Mode
Server is powered off
During POST
After OS boots
Disabled
Redirect window appears, but is blank
Redirect window
Redirect window
Pre-boot
EMP commands available
Redirect window*
Redirect window
Always Active
EMP commands available
Redirect window*
EMP commands available
You can modify the operation mode by selections in the POST reset and POST power-up dialogs. These are server control
dialogs available with the EMP Console.