Mitsubishi Electric FR-F800, Instruction Manual

Page: 226 / 834

(E) Environment setting parameters Parameters
5 - 64
5.4.3 PU display language selection
The display language of the parameter unit (FR-PU07) can be selected.
5.4.4 Buzzer control
The buzzer can be set to "beep" when the keys of the operation panel and the parameter unit are op-
erated.
5.4.5 PU contrast adjustment
Contrast adjustment of the LCD of the LCD operation panel (FR-LU08) and of the parameter unit (FR-
PU07) can be performed.
Decreasing the setting value lowers the contrast.
The above parameter is displayed as a simple mode parameter only when the LCD operation panel
(FR-LU08) and the parameter unit (FR-PU07) is connected.
Pr. Name Initial value Setting range Description
145
E103
PU display language selection —
0 Japanese
1 English
2 German
3 French
4 Spanish
5 Italian
6 Swedish
7 Finnish
Pr. Name Initial value Setting range Description
990
E104
PU buzzer control 1
0 Without buzzer
1 With buzzer
NOTE When with buzzer is set, the buzzer sounds if an inverter fault occurs.
Pr. Name Initial value Setting range Description
991
E105
PU contrast adjustment 58 0 to 63 0: Low
→
63: High