Mitsubishi Electric FR-D720S SC EC, Instruction Manual

Page: 432 / 512

Setting for the parameter unit and operation panel Parameter
6 - 282
6.21 Setting for the parameter unit and operation panel
6.21.1 RUN key rotation direction selection (Pr. 40)
Used to choose the direction of rotation by operating the RUN key of the operation panel.
The above parameter can be set when Pr. 160 = 0.
6.21.2 PU display language selection (Pr. 145)
By using parameter 145 you can select the display language for the parameter unit FR-PU04/
FR-PU07.
The above parameter can be set when Pr. 160 = 0.
Purpose Parameters that must be set
Refer to
Section
Selection of rotation direction by the
RUN key of the operation panel RUN key rotation direction selection Pr. 40
6.21.1
Switch the display language of the
parameter unit PU display language selection Pr. 145 6.21.2
Use the setting dial of the operation
panel like a volume for frequency
setting.
Key lock of operation panel Operation panel operation selection Pr. 161 6.21.3
Change the magnitude of change of
frequency setting by the setting dial
of the operation panel Magnitude of frequency change setting Pr. 295 6.21.4
Control of the parameter unit buzzer PU buzzer control Pr. 990 6.21.5
Adjust LCD contrast of the parame-
ter unit PU contrast adjustment Pr. 991 6.21.6
Pr. No. Name
Initial
Value
Setting
Range
Description Parameters referred to
Refer to
Section
40
RUN key rotation
direction selection
0
0 Forward rotation —
1 Reverse rotation
Pr. No. Name
Initial
Value
Setting
Value
Description Parameters referred to
Refer to
Section
145
PU display language
selection
1
0 Japanese —
1 English
2 German
3 French
4 Spanish
5 Italian
6 Swedish
7 Finnish