Mitsubishi Electric FR-D720S SC EC, Instruction Manual

Page: 433 / 512

Parameter Setting for the parameter unit and operation panel
FR-D700 SC EC 6 - 283
6.21.3 Operation panel frequency setting/key lock operation selection (Pr. 161)
The digital dial of the operation panel can be used like a potentiometer to perform operation.
The key operation of the operation panel can be disabled.
The above parameter can be set when Pr. 160 = 0.
Pr. No. Name
Initial
Value
Setting
Range
Description Parameters referred to
Refer to
Section
161
Frequency setting/
key lock operation
selection
0
0
Setting dial
frequency
setting mode
Key lock mode invalid
—
1
Setting dial
potentiometer
mode
10
Setting dial
frequency
setting mode
Key lock mode valid
These setting must be
confirmed by press-
ing the MODE key for
about 2 s.
11
Setting dial
potentiometer
mode
NOTES
You can find a detailed description of the operation panel with examples in section 4.3
"Operation Panel".
When the setting dial and key operation is made invalid, "HOLD" appears on the operation
panel while pressing a key.
The STOP/RESET key is valid even in the operation lock status.