Mitsubishi Electric FR-CC2-P, Instruction Manual

Page: 8 / 184

1
INTRODUCTION
7
1
INTRODUCTION
This chapter contains the descriptions that must be read before
using this product.
Always read the instructions before using the equipment.
I
1.1 Product checking...................................................................... 8
1.2 Component names.................................................................... 9
1.3 Related manuals ....................................................................... 10
<Abbreviations>
Operation panel ....... Operation panel of the inverter (FR-DU08)
Converter unit .......... Converter unit FR-CC2-P series (for parallel operation)
Inverter..................... Mitsubishi Electric FR-A802-P series inverter (separated converter type for parallel
operation)
Pr. ............................ Parameter number (Number assigned to function)
<Trademarks>
• Microsoft and Visual C++ are registered trademarks of Microsoft Corporation in the United States and other
countries.
• Other company and product names herein are the trademarks and registered trademarks of their respective
owners.
<Notes on descriptions in this Instruction Manual>
• Connection diagrams in this Instruction Manual suppose that the control logic of the input terminal is the sink
logic, unless otherwise specified. (For the control logic, refer to page 45 .)
Harmonic Suppression Guidelines
All the models of the inverters used by specific consumers are covered by "the Harmonic Suppression
Guidelines for Consumers Who Receive High Voltage or Special High Voltage". (For the details, refer to
page
67 .)