Mitsubishi Electric FR-A8ND, Instruction Manual

Page: 92 / 104

OBJECT MAP
91
7
7.2.11 Class 0x80 (Extended object IV)

Class 0x80 Instance 1
Inverter monitored value can be read. The data type of each attribute is UINT, and the size is 2 bytes.
The readable monitor items depend on the inverter. Refer to the Instruction Manual (Detailed) of the inverter for the details of
each monitor.
[Attribute]
Class 0x80 Instance 1
Attribute
ID
Access Definition Unit
11 Get Output frequency

,

0.01 Hz

12 Get Output current

0.01 A/0.1 A

13 Get Output voltage

0.1 V
15 Get Frequency setting 0.01 Hz

16 Get Running speed 1 r/min

17 Get Motor torque 0.1%
18 Get Converter output voltage 0.1 V
19 Get Regenerative brake duty 0.1%
20 Get
Electronic thermal relay
function load factor
0.1%
21 Get
Output current peak
value
0.01 A/0.1 A

22 Get
Converter output voltage
peak value
0.1 V
23 Get Input power 0.01 kW/0.1 kW

24 Get Output power 0.01 kW/0.1 kW

25 Get Input terminal status

—
26 Get Output terminal status

—
27 Get Load meter 0.1%
28 Get Motor excitation current 0.01 A/0.1 A

29 Get Position pulse —
30 Get
Cumulative energization
time
1 h
32 Get Orientation status —
33 Get Actual operation time 1 h
34 Get Motor load factor 0.1%
35 Get Cumulative power 1 kWh
36 Get
Position command
(lower digits)
1
37 Get
Position command
(upper digits)
1
38 Get
Current position
(lower digits)
1
39 Get
Current position
(upper digits)
1
40 Get
Droop pulse
(lower digits)
1
41 Get
Droop pulse
(upper digits)
1
42 Get Torque command 0.1%
43 Get Torque current command 0.1%
Class 0x80 Instance 1
Attribute
ID
Access Definition Unit