79
7
The value cannot be written while the inverter is running.
Error response is returned when the inverter will not accept the same order.
The data written to Attribute 112, 113 can be read from Attribute 112.
Writing any value will clear the fault records.
The setting depends on the inverter capacity.
Input terminal monitor details (when the terminal is ON: 1, when the terminal is OFF: 0, —: undetermined value)
Output terminal monitor details (when the terminal is ON: 1, when the terminal is OFF: 0, —: undetermined value)
Monitoring is available only for the FR-A800 series.
The monitored values are retained even if an inverter fault occurs. Resetting will clear the retained values.
185
Get
UINT
2
Output terminal status
186
Get
UINT
2
Load meter
187
Get
UINT
2
Motor excitation current (0.01 A/0.1 A)
188
Get
UINT
2
Position pulse
189
Get
UINT
2
Cumulative energization time (1 h)
191
Get
UINT
2
Orientation status
192
Get
UINT
2
Actual operation time (1 h)
193
Get
UINT
2
Motor load factor (0.1%)
194
Get
UINT
2
Cumulative power (1 kWh)
195
Get
UINT
2
Position command (lower digits)
196
Get
UINT
2
Position command (upper digits)
197
Get
UINT
2
Current position (lower digits)
198
Get
UINT
2
Current position (upper digits)
199
Get
UINT
2
Droop pulse (lower digits)
b15
b0
—
—
—
—
CS
RES
STOP MRS
JOG
RH
RM
RL
RT
AU
STR
STF
b15
b0
—
—
—
—
—
—
—
—
So
ABC2
ABC1
FU
OL
IPF
SU
RUN
Class 0x2A Instance 1
Attribute ID Access Data type No. of data bytes
Definition