Mitsubishi Electric FR-A8ND, Instruction Manual

Page: 43 / 104

42
OBJECT MAP DEFINITIONS
6.2.2 Overview of the message communication (Explicit message connection)
• The data size of parameter writing or reading (Class 0x66, 0x67, 0x70 to 0x79, and 0x90 to 0x93) through the Explicit
message is 2 bytes.
• When the 32-bit parameter setting is read through the Explicit message and the read value exceeds 0xFFFF, the reply data
will be 0xFFFF.
• When reading or writing 32-bit parameters, use Instance 127 or 177 of the I/O communication.
• When reading 32-bit monitor (Class 0x80), use Instance 127 or 177 of the I/O communication or use the Explicit
communication.
NOTE
• In the following tables, "Get" means reading from the inverter, and "Set" means writing to the inverter.
Class Object name Page
0x01 Identity Object 59
0x03 DeviceNet Object 61
0x04 Assembly Object 63
0x05 DeviceNet Connection Object 64
0x28 Motor Data Object 71
0x29 Control Management Object 72
0x2A AC Drive Object 75
0x66 Extended Object I 81
0x67 Extended Object II 88
0x70 to 0x79 Extended Object III 90
0x80 Extended Object IV 91
0x90 to 0x93 Extended Object V 95
Class Object name Page