EN-17
Setting the aspect ratio
You can change the aspect ratio of the input video signal (or the ratio of width to height of the image). Change the
setting according to the type of the screen to be used or your preference.
How to change the settings:
With the remote control:
1. Press the ASPECT button.
• Every time the ASPECT button is pressed, the aspect mode changes from AUTO (FULL) to AUTO (16:10), to
AUTO (16:9), to AUTO (4:3), to 16:9, to REAL, to FULL, and back to AUTO (FULL).
• The following table shows the image display patterns depending on the settings.
16:9.37
1366 x 800
AUTO (FULL)
Input signal
Setting
AUTO (16:10)
AUTO (16:9)
AUTO (4:3)
16:9
REAL
FULL
Input video signal
is displayed at
the max height
(800 pixels) or
max width (1366
pixels) of the
panel while its
aspect ratio is
maintained.
Select this setting
when using a
16:10 screen.
Select this setting
when using a 16:9
screen.
Select this setting
when using a 4:3
screen.
Regardless of the
type of input
signal, image is
displayed at 16:9
aspect ratio (1366
x 768 pixels).
Select this setting
when inputting
squeeze signal.
Input video signal
is displayed at its
original pixel size.
(When the pixel
size is larger than
the panel size,
only the center
part of the image
is displayed.)
Regardless of the
type of input
signal, image is
displayed at the
full panel size
(1366 x 800
pixels).
4:3/
5:4
1066 x 800/
1000 x 800
1280 x 800
16:9.6
1344 x 800
16:9.04
1366 x 771
16:9
1366 x 768
16:10
4:3/
5:4
1066 x 800/
1000 x 800
1280 x 800
16:9.6
1280 x 768
16:9.04
1280 x 720
16:9
1280 x 720
16:10
1024 x 768/
960 x 768
1228 x 768
16:9.6
1280 x 768
16:9.04
1360 x 768
16:9
1366 x 768
4:3/
5:4
1066 x 800/
1000 x 800
1066 x 666
16:9.6
1066 x 640
16:9.04
1066 x 602
16:9
1066 x 600
16:9
1366 x 768
16:10
16:9
1366 x 768
16:9
1366 x 768
16:9
1366 x 768
16:9
1366 x 768
1280 x 800
16:9.6
1280 x 768
16:9.04
1360 x 768
16:9
1366 x 768, etc.
16:10
16:9.37
1366 x 800
16:9.37
1366 x 800
16:9.37
1366 x 800
16:9.37
1366 x 800
4:3/
5:4
1024 x 768, etc.
4:3/
5:4
16:10
4:3/5:4 signal,
XGA signal
(1024 x 768),
etc.
WXGA signal
1280 x 800
(16:10)
WXGA signal
1280 x 768
(16:9.6)
WXGA signal
1360 x 768
(16:9.04)
16:9 signal
and
WXGA signal
1366 x 768
With the FEATURE menu:
(See page 24 for menu setting.)
1. Display the FEATURE menu.
2. Select ASPECT by pressing the
S
or
T
button.
3. Select your desired aspect ratio by pressing the
W
or
X
button.
To cancel the menu:
4. Press the MENU button.
Important:
• If you change the aspect ratio to “16:9,” “REAL,” or “FULL” or use the split mode while displaying images on a 4:3
screen with the aspect ratio set to “AUTO (4:3)”, images appear partly off screen.
• In such cases as when you keep displaying images in the 4:3 mode for a long time and then change the mode to
FULL, the masking areas may remain as afterimage around the displayed image. (See page 44.)
FEATURE
AUTO (FULL)
opt.
ASPECT
Viewing computer images (continued)
