- 1 -
◆
Safety Precautions
(Be sure to read this cautions before using the product)
The user should read this manual carefully in order to use the product in a correct and safe manner.
Cautionary information in this manual applies only to this product, and appears under "WARNING" or
"CAUTION" headings, depending on the degree of hazard.
Although CAUTION information is associated with a lower degree of hazard, failure to observe
CAUTION information could have serious consequences under certain conditions. Both the WARNING
and CAUTION information should be stringently observed.
This manual must always be presented to the end user, and should be kept in a safe place where it
can be easily referenced as required.
Operation-Related Precautions
WARNING
・
Use this product only with the specified voltage. Failing to do so could result in fires,
electrical shocks, or product failure.
・
Never plug in or unplug the power cable with wet hands, as this could cause a product
failure or electrical shocks.
・
Keep water off the product. Failing to do so could cause ground leakage which could result
in fires, electrical shocks, or product failure.
・
Release and pull out the latch before pulling out the power cable.
If you pull the power cable without the latch released, damage may occur in the electric wire
and the terminal stand, and it may cause a fire and an electric shock.
・
If you notice trouble such as smoke, smell, and fire, hand in the product for inspection and
repair.
CAUTIONS
・
Use this product only for the prescribed applications (as a Gigabit Ethernet regenerating relay
and an interface converter). Do not use the product for other applications.
・
Do not use optical modules other than this product.
Failure to observe this caution information could result in a hazardous
condition which could cause a minor to medium level injury, or
equipment damage.
WARNING
CAUTION
Failure to observe this warning information could result in serious
injury or death.
