Interchangeable Colour Wheels
Choose between two colour wheels, one accentuating
colour and the other emphasizing brightness, depending
on the type of images to be projected. This interchangeability
enables a more appropriate expression of the images
being reproduced.
360° Projection
Images can be projected over a full
360° range along the vertical axis*
including reproduction on the ceiling
or floor. The application possibilities
are limitless.
*Excluding use in high-altitude mode.
Network Connectivity
Projectors are equipped with an RJ-45 LAN terminal for
remote operation. Additionally, when used with Crestron®
software, integrated control of up to 250 projectors including
power on/off control, message display and confirmation
of lamp service hours is possible using RoomView™/
e-Control™. Each projector
is equipped with AMX Device
Discovery for simplified device
management and compatible
with PJLink™.
* The trademark of PJLink is trademark applied for registration or registered trademark in
Japan, the United States, and other countries and areas.
Multiple Terminals
Many different interfaces are possible thanks to a variety of
terminals including 3G-SDI (UD8400U only), DVI-D (HDCP),
HDMI and 5BNC. A control terminal (compatible with
RS-232C) is also provided for easier system integration.
ID-compatible Remote Control
ID settings for up to 63 projectors are possible. Setting the
IDs allows control of each individual projector when multiple
projectors are installed.
Power Zoom/Focus and Lens Shift
The zoom/focus and lens shift adjustment are powered by
an electric motor, ensuring easy operation.
Stand-by Mode under 0.3W*
Stand-by (low) mode power consumption is less than 0.3W,
offering increased energy savings and further contributing
to environmental preservation.
*When in stand-by (low) mode. At this time, use of the LAN function, RS-232C output and
Remote 1 is not possible.
Mechanical Shutter
An internal shutter in the projector enables light to be
completely blocked when the projector is in Mute mode.
Side Access Lamp
Lamp replacements can be done through the side of the
projector for easy lamp replacements.
• Direct power off
• Test pattern
• High-altitude mode (2,000-2,700m)
• Closed caption support
• Motorized lens shift
• Mechanical shutter
• Lamp side replacement
for auditoriums, boardrooms and
conference centres
Optional
(UD8400U)
