EN-30
INSTALLATION menu
INSTALLATION
opt.
LAMP MODE
OFF
AUTO POWER
ON
STANDARD
STANDBY MODE
STANDARD
ON
SPLASH SCREEN
ON
AUTO POWER
OFF
OFF
BACK COLOR
BLUE
OFF
IMAGE REVERSE
BLACK
AV MUTE MODE
IMAGE CAPTURE
GO
LENS LOCK
OK
INSTALLATION
LENS LOCK
opt.
OFF
OFF
OK
ZOOM/FOCUS
LOCK
LENS SHIFT LOCK
LENS SHIFT
RESET
ITEM
SETTING
FUNCTION
LAMP MODE
STANDARD
Select this option when you want to view images in a well-lit room.
LOW
Select to moderate the intensity of the lamp. The operating sound is reduced
and the lamp lifetime becomes longer.
STANDBY MODE
STANDARD
Select this option when you control the projector via LAN during power
standby.
LOW
Select this option when you don’t control the projector via LAN during power
standby. This option disables the LAN terminal and reduces the power
consumption during the power standby.
AUTO POWER ON
ON / OFF
When ON is chosen, the lamp is automatically lit when the power cord is
plugged in the wall outlet. Choose ON when using the projector mounted on
the ceiling.
• The projector is in the stand-by mode when the lamp is off. Use the
remote control to turn on the lamp.
AUTO POWER OFF
OFF / 5-60min
Use to set the time elapsed before the projector enters the stand-by mode
when there is no signal input from the source.
IMAGE CAPTURE
GO
Use to capture the screen for the splash screen. (See page .37.)
SPLASH SCREEN
ON / OFF
Choose ON to display the splash screen when the power is turned on.
• The splash screen can be changed. (See page 37.)
BACK COLOR
BLUE / BLACK /
IMAGE
Use to select the background from among BLUE, BLACK and IMAGE, which
will be displayed when there is no signal input from the source. When IMAGE
is selected, the splash screen will be displayed.
AV MUTE MODE
BLACK / IMAGE
Use to choose the background, either BLACK, or IMAGE, which will be
displayed when the AV MUTE button is pressed. When IMAGE is chosen, the
splash screen will be displayed.
IMAGE REVERSE
OFF
Select when viewing images from the front with the projector installed on the
floor.
MIRROR
Select when viewing images projected from the behind of the screen with the
projector installed on the floor.
INVERT
Select when viewing images projected from the behind of the screen with the
projector installed on the ceiling.
MIRROR INVERT
Select when viewing images from the front with the projector installed on the
ceiling.
LENS LOCK
OK
The LENS LOCK menu is displayed for the following settings.
ZOOM/FOCUS LOCK
ON / OFF
Use to enable or cancel the FOCUS LOCK and ZOOM LOCK.
LENS SHIFT LOCK
ON / OFF
Use to enable or cancel the LENS SHIFT LOCK.
LENS SHIFT RESET
OK
Use to reset the position of the lens to the factory setting.
• Regardless of the setting of LAMP MODE in the INSTALLATION menu, the STANDARD lamp mode is activated by default
whenever the projector is turned on. When LAMP MODE has been set to LOW, the lamp mode changes from STANDARD to
LOW about 1 minute after turn-on.
• When the lamp mode is switched, the projected image may flicker.
• Frequent switching of the lamp mode may damage the lamp.
• You can’t set IMAGE CAPTURE and SPLASH SCREEN when PASSWORD FUNCTION in the FEATURE menu has been set to
SPLASH ID SCREEN to enable the password lock.
• When you continue projection for a long time with BACK COLOR or AV MUTE MODE set to IMAGE, an afterimage may persist
on the screen. Consult your dealer in this case.
Menu operation (continued)
