EXTERNAL REMOTE TERMINAL 1
The image can be stored in memory by sending the remote signal
through the external remote terminal on the rear panel. When the
MEMORY & PRINT function is set to ON, the image will be printed
after being stored in memory.
Make out the necessary circuit to use this function by referring to the
following.
EXTERNAL REMOTE TERMINAL SIGNAL
ALLOCATION (STEREO JACK)
Pin No. Function Description
1 Ground
Earth
2
MEMORY Memory : When the signal becomes "LOW" from
"HIGH", the image is stored in memory.
(When the signal has been "LOW" for
15 ms or more, the image is stored in
memory.) See page 40.
3
BUSY1
Refer to the BUSY LEVEL setting and BUSY 1&2
SELECT setting of REMOTE SET menu. See
pages 42-44.
When the signal from BUSY terminal is received with TTL level, keep
the following.
|
I
OL
| = 2 mA or less, | I
OH
| = 1 mA or less
|
I
OL
| means the current
fl
owing into the unit at Low output,
| I
OH
| means the current
fl
owing out of the unit at High output.
Just after completing printing, there is a period that memory signal is
not accepted.
1
2
3
1
3
2
22k
Ω
22k
Ω
10k
Ω
100
Ω
DTC124EK
DC5V
22k
Ω
10k
Ω
100
Ω
DTC124EK
DC5V
22k
Ω
To VCP
From VCP
2
3
Circuit inside the VCP
MEMORY
BUSY
DMC2838
Circuit inside
and pin No.
Plug pin No.
PRINTING
28
