manualshive.com logo in svg

Mitsubishi Electric CP-31W, Operation Manual, Page: 29 / 62

Share
Download
Mitsubishi Electric CP-31W Operation Manual Download Page 29

(backside of the ribbon cartridge)

gear

LOADING RIBBON CARTRIDGE

Be sure to turn on the power of this unit before loading a ribbon cartridge.

  When you change the ribbon cartridge, remove the  

ribbon cartridge in this unit by pressing the RIBBON 
EJECT button.

When you use the unit for the 

fi

 rst time, this operation is not required.

  Remove slack in the ink ribbon.

Turn the gear in the direction of the arrow (backside of the ribbon 
cartridge) to remove slack.

NOTE

•  If slack is left, the ink ribbon may be damaged when loaded.
•  Do not turn the gear of the side without the arrow. Turning it may 

cause slack in the ink ribbon.

  Insert the ribbon cartridge into the ribbon cartridge 

loading slot.

•  Be sure to hold the handle.
•  Insert the ribbon cartridge in the direction of the arrow with the 

marking of “TOP SIDE” up.

The installation of print paper and ribbon cartridge is 
completed.

NOTE

•  Do not leave more than 15 sheets of print paper on the print outlet.
•  Be sure to install the paper cassette properly. If it is not installed 

properly, a paper jam may occur.

•  Replace print paper and ribbon cartridge at the same time.

CAUTION

  

  

  

Do not put your hand inside the product from the paper cassette 
loading slot or ribbon cartridge loading slot. This product has 
mechanical parts (switches and rollers) and parts that are heated to 
a very high temperature or sensitive to static electricity.

21

CONNECTIONS

PRECAUTIONS

FEA

T

URES

PREP

ARA

TION

TROUBLE-

SHOOTING

OTHERS

PRINTING

ADJUSTMENTS

Summary of Contents for CP-31W































































Reviews:

No comments